Unit of competency Outline

Date retreived
22/07/2026 8:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect transmission structures, conductors and hardware

Inspect transmission structures, conductors and hardware

Unit of competency
National Code
UETDRTO005
State Code
ODN69
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
20/09/2021
View on TGA
State Implementation and Classification
Approved Date
21/12/2021
Field of Education
031311 - Powerline Installation And Maintenance
Original Release Date
21/12/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to inspect transmission structures, conductors and hardware in the electricity supply industry (ESI).It includes the inspection of transmission poles and towers, conductors, underground and overhead transition points, hardware and earthing systems in accordance with work plan and workplace requirements.It also includes the completion of inspection reports and other relevant documentation in accordance with requirements.The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace.Other conditions may also apply under state and territory legislative and regulatory licensing requirements which must be confirmed prior to commencing this unit.
Notes
Elements and Performance Criteria
1 Prepare for the inspection of transmission structures, conductors and hardware
  • 1.1 Legislation, regulations, standards, codes of practice and organisational workplace requirements for the work to be performed are referred to and confirmed
  • 1.2 Work plan is obtained and confirmed in accordance with workplace requirements
  • 1.3 Plant, tools, equipment and personal protective equipment (PPE) required for work are determined, obtained and confirmed in working order
  • 1.4 Hazards are identified, risks assessed and control measures identified and applied
  • 1.5 Work is prioritised and sequenced for completion in accordance with work plan and workplace requirements
  • 1.6 Work permits are organised in accordance with workplace requirements
  • 1.7 Liaison and communication with stakeholders is carried out in accordance with workplace requirements
2 Carry out inspection of transmission structures, conductors and hardware
  • 2.1 Legislation, regulations, standards, codes of practice and organisational workplace requirements for the work to be performed are applied and monitored
  • 2.2 Working at heights and use of plant, tools, equipment and PPE are carried out in accordance with workplace requirements
  • 2.3 Hazard control measures are monitored in accordance with workplace requirements
  • 2.4 Inspection of structures, conductors and hardware is carried out in accordance with the work plan and workplace requirements
  • 2.5 Incidents or unplanned events are responded to in accordance with workplace requirements
3 Complete work and documentation
  • 3.1 Completed work is checked for compliance against the work plan and workplace requirements
  • 3.2 Incidents or unplanned events are reported in accordance with workplace requirements
  • 3.3 Worksite is rehabilitated, cleaned and made safe in accordance with workplace requirements
  • 3.4 Plant, tools and equipment are cleaned, checked and returned to storage in accordance with workplace requirements
  • 3.5 Work permits are completed in accordance with workplace requirements
  • 3.6 Work records, reports and documentation are completed in accordance with workplace requirements
No information
No information
Replaces
State Code National Code Title Type
OBG63 UETTDRTP30 Inspect transmission overhead structures and electrical apparatus Unit of competency