Unit of competency Outline

Date retreived
22/07/2026 8:03 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect, test and troubleshoot aircraft pneumatic systems and components

Inspect, test and troubleshoot aircraft pneumatic systems and components

Unit of competency
National Code
MEA310
State Code
AUF92
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
31/08/2018
View on TGA
State Implementation and Classification
Approved Date
22/07/2015
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
22/07/2015
Nominal Hours
60
Description
This unit of competency requires application of hand skills, standard trade practices and systems knowledge in the inspection, testing and troubleshooting of both fixed and rotary wing aircraft pneumatic systems and components during the performance of scheduled or unscheduled maintenance. Maintenance may be performed individually or as part of a team.The unit is part of the Mechanical Certificate IV (Aircraft Maintenance Stream) training pathway. The unit is used in workplaces that operate under the airworthiness regulatory systems of the Australian Defence Force (ADF) and the Civil Aviation safety Authority (CASA). Where a CASA licensing outcome is sought this unit forms part of the CASA requirement for the granting of the chosen maintenance certification licence under Civil Aviation Safety Regulation (CASR) Part 66, in accordance with the licensing provisions in the Companion Volume Implementation Guide.
Notes
Elements and Performance Criteria
1. Inspect pneumatic systems and components
  • 1.1 Isolation tags already attached to the system or related systems are checked and aircraft configured for safe system inspection and operation in accordance with specified procedures
  • 1.2 Pneumatic system is visually or physically checked for external signs of defects in accordance with specified procedures while observing all relevant work health and safety (WHS) requirements
2. Test pneumatic systems
  • 2.1 The aircraft and pneumatic systems are correctly prepared in accordance with specified procedures for the application of power
  • 2.2 Power is applied and system functionally tested in accordance with specified procedures for evidence of malfunction or leaks
  • 2.3 System calibration or adjustments are performed in accordance with specified procedures
3. Prepare for troubleshooting
  • 3.1 Relevant maintenance documentation and modification status, including system defect/service difficulty reports, where relevant, are interpreted to identify an unserviceability
4. Troubleshoot pneumatic systems
  • 4.1 Available information from maintenance documentation and inspection and test results is used, where necessary, to assist in fault determination
  • 4.2 Maintenance manual fault diagnosis guide and logical processes are used to ensure efficient and accurate troubleshooting to line replacement level
  • 4.3 Specialist advice is obtained, where required, to assist with the troubleshooting process
  • 4.4 Pneumatic system faults are located and the causes of the faults are clearly identified and correctly recorded in maintenance documentation, where required
  • 4.5 Fault rectification requirements are determined to assist in planning the repair or adjustment
No information
No information
Replaces
State Code National Code Title Type
D4426 MEA310C Inspect, test and troubleshoot aircraft pneumatic systems and components Unit of competency