Unit of competency Outline

Date retreived
22/07/2026 6:24 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Nail strip timber flooring

Nail strip timber flooring

Unit of competency
National Code
MSFFL2042
State Code
OAJ81
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040321 - Floor Coverings
Original Release Date
22/05/2019
Nominal Hours
20
Description
This unit describes the skills and knowledge required to use top-nailing or secret nailing methods when installing tongue and groove strip timber flooring onto plywood underlay and battens over joists, concrete or a subfloor to either raise a floor or correct the level of a floorTimber flooring includes timber plywood underlay manufactured under a JAS-ANZ accredited product certification scheme meeting the internationally recognised IS0 Type 5 system for product reliability to AS/NZS 2269.0:2012 Plywood - Structural - SpecificationsThis unit applies to flooring technicians working in accordance with pre-determined work orders.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking flooring work. Industry standards and codes of practice within Australia must also be applied. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Identify and follow work health and safety, legislative and organisational requirements
  • 1.2 Correctly identify work requirements and process from review of documentation
  • 1.3 Assess subfloor condition for suitability for nailing consistent with Australian Standards and manufacturer recommendations
  • 1.4 Select fixings and adhesives based on job requirements
  • 1.5 Select and check tools, equipment and materials prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
  • 1.6 Plan sequence of work to ensure efficiency and quality of application
2. Prepare to nail strip timber flooring
  • 2.1 Follow instructions and sequence for nailing and fixing timber flooring
  • 2.2 Establish work lines and starting point
  • 2.3 Lay out timber flooring to meet directional sequence, pattern match, specification requirements, minimising waste and joins
  • 2.4 Inspect timber flooring material and confirm species, grade, size and quantity against work orders
  • 2.5 Moisture check timber using required equipment and confirm suitability of moisture content for site conditions as per pre-site inspection procedures
  • 2.6 Maximise the aesthetics of the materials by matching grains and colours where appropriate
  • 2.7 Establish safely located work station as power source for nail guns, and run air hoses to worksite in manner that minimises risk
3. Nail strip timber flooring
  • 3.1 Organise and use nails, staples and adhesives for fixing in accordance with safety management requirements
  • 3.2 Use nailing methods and equipment in accordance with manufacturer recommendations and Australian Standards
  • 3.3 Position strip timber flooring using cramping procedures
  • 3.4 Use required nailing methods based on job requirements
  • 3.5 Inspect finished job and rectify any imperfections following workplace procedures.
4. Complete housekeeping
  • 4.1 Store and recycle unused materials in accordance with workplace procedures
  • 4.2 Check, clean and store tools and equipment in accordance with workplace procedures
  • 4.3 Clean work area and dispose of rubbish safely
  • 4.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI356 MSFFL2026 Nail strip timber flooring Unit of competency