Unit of competency Outline

Information current as of
22/10/2026 6:05 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use and maintain measuring equipment

Use and maintain measuring equipment

Unit of competency
National Code
AUMATK004
State Code
WH912
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Original Release Date
10/01/2014
Nominal Hours
25
Field of Education
030717 - Plant And Machine Operations
Description
This unit describes the performance outcomes required to use, adjust and maintain measuring equipment used in automotive development, service and repair.It applies to those in an automotive and related component manufacturing environment at a production worker level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1. Prepare to carry out measurements
  • 1.1 Measuring instructions and work plans are identified and interpreted
  • 1.2 Measuring methods appropriate to the circumstances are selected according to workplace procedures
  • 1.3 Measuring equipment is selected and checked to ensure it is calibratedwithin appropriate tolerances
2. Carry out measurements and analyse results
  • 2.1 Measurement is carried out according to workplace procedures and equipment manufacturer specifications
  • 2.2 Measurement results are compared with specifications to assess compliance or non-compliance
  • 2.3 Results are documented and recommendations are made
3. Maintain measuring equipment
  • 3.1 Information required for equipment maintenance is accessed from manufacturer specifications and interpreted
  • 3.2 Measuring equipment is checked and calibrated against manufacturer specifications and faulty equipment is tagged and removed from service according to workplace procedures
  • 3.3 Measuring equipment is maintained and stored and maintenance records are completed according to workplace and equipment manufacturer specifications
No information
No information
No information
State Code National Code Title Type
J831 AUM40113 Certificate IV in Automotive Manufacturing Qualification