Unit of competency Outline

Date retreived
23/07/2026 1:00 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect, repair and modify non-primary structure components in aircraft cabins and cockpits

Inspect, repair and modify non-primary structure components in aircraft cabins and cockpits

Unit of competency
National Code
MEA436
State Code
OAD09
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
31/08/2018
View on TGA
State Implementation and Classification
Approved Date
04/01/2019
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
04/01/2019
Nominal Hours
50
Description
This unit of competency describes the skills and knowledge required to inspect non-primary metallic and non-metallic structure components in aircraft cabins and cockpits for damage, and to repair the components. It requires the application of hand skills and the use of maintenance publications. Work may be performed individually or as part of a team.The unit applies to fixed and rotary wing aircraft cabins and cockpits during scheduled and unscheduled maintenance. It is used in workplaces that operate under the airworthiness regulatory systems of the Australian Defence Force (ADF) and the Civil Aviation Safety Authority (CASA).This unit forms part of the Civil Aviation Safety Authority (CASA) requirement for maintenance certification licences under Civil Aviation Safety Regulation (CASR) Part 66. Where a CASA licensing outcome is sought, users must refer to the licensing provisions in the MEA Aeroskills Companion Volume Implementation Guide.
Notes
Elements and Performance Criteria
1. Inspect for damage to aircraft cabin/cockpit non-primary structure metallic and non-metallic components
  • 1.1 Visually inspect metallic and/or non-metallic components for damage
  • 1.2 Determine extent of damage and confirm it is within repair limits
2. Prepare to perform routine repairs and minor modifications to aircraft cabin/cockpit non-primary structure metallic and non-metallic components
  • 2.1 Determine applicable metallic or non-metallic repair scheme according to maintenance documentation and standard organisational procedures
  • 2.2 Obtain modification instructions according to standard organisational procedures
  • 2.3 Select required materials and equipment and organise them according to organisational procedures and requirements for maintenance documentation
3. Perform routine repairs and minor modifications to aircraft cabin/cockpit non-primary structure metallic components
  • 3.1 Perform component repairs and minor modifications using aircraft standard practices and according to work health and safety (WHS) requirements and approved repair scheme or modification instructions
  • 3.2 Clean work area of waste material
  • 3.3 Make minor adjustments where necessary for components to operate within prescribed specifications
4. Perform routine repairs and minor modifications to aircraft cabin/cockpit non-primary structure non-metallic components
  • 4.1 Perform non-metallic component repairs and minor modifications using aircraft standard practices and process requirements, and according to WHS requirements and approved repair scheme or modification instructions
  • 4.2 Clean work area of all waste material
  • 4.3 Make minor adjustments where necessary for components to operate within prescribed specifications
5. Complete routine repair and minor modification activities
  • 5.1 Complete and process required documentation according to standard organisational procedures
  • 5.2 Tag, seal and package repaired components or assemblies according to specified procedures, where required
No information
No information
Replaces
State Code National Code Title Type
AUD69 MEA419 Inspect and repair/modify aircraft cabin/cockpit non-primary structure components Unit of competency