Unit of competency Outline

Date retreived
22/07/2026 4:01 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Monitor implementation of quality control for production and maintenance

Monitor implementation of quality control for production and maintenance

Unit of competency
National Code
UEPOPS065
State Code
ODY93
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
20/04/2022
View on TGA
State Implementation and Classification
Approved Date
14/04/2023
Field of Education
080317 - Quality Management
Original Release Date
14/04/2023
Nominal Hours
18
Description
This unit involves the skills and knowledge required to monitor the implementation of production and maintenance quality control procedures at a power generation facility. Quality control is a process used to ensure variations in quality are kept to a minimum. Quality control in a power generation facility will focus on a set of processes and procedures intended to ensure that personnel, plant and equipment operate in accordance with workplace procedures. Competency in this unit requires the ability to plan for quality control,monitor quality control and complete all documentation. Individuals will, in general, work as an operator, in a power generation facility. Power generation plant operators are trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan for quality control
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) regulations, legislative requirements, codes of practice, manufacturers’ recommendations and specifications, environmental requirements and workplace procedures are identified, applied and monitored
  • 1.2 Quality control parameters are established for power generation production and maintenance in accordance with workplace procedures
  • 1.3 Quality control process improvement techniques are used in the identification and resolution of quality variances in power generation in accordance with workplace procedures
2 Monitor quality control
  • 2.1 Monitoring equipment is checked for calibration, and environmental conditions are confirmed to ensure reliability and accuracy of test results in accordance with workplace procedures,
  • 2.2 Quality control procedures for production and maintenance in power generation is monitored in accordance with workplace procedures
  • 2.3 Deviation and fault data collected and reported in accordance with workplace procedures
3 Complete documentation
  • 3.1 Calibration records of test equipment is maintained in accordance with workplace procedures
  • 3.2 Documentation is completed in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
OAG50 UEPOPS416 Monitor implementation of quality control for production and maintenance Unit of competency