Unit of competency Outline

Date retreived
22/07/2026 6:10 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct and dismantle fences and gates

Construct and dismantle fences and gates

Unit of competency
National Code
RIICCM211E
State Code
OCX47
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2021
View on TGA
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
040301 - Building Science And Technology
Original Release Date
18/06/2021
Nominal Hours
35
Description
This unit describes the skills and knowledge required to construct and dismantle fences and gates in civil construction, including constructing gates, fencing and signage and carrying out dismantling procedures and housekeeping procedures.It applies to those working in operational roles. They generally work under minimal supervision to undertake a broad range of tasks in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for constructing and dismantling fences and gates
  • 1.1 Obtain, interpret and confirm work requirements
  • 1.2 Access, interpret and apply documentation required to construct and dismantle fences and gates documentation, and ensure the work activity is compliant
  • 1.3 Obtain and interpret emergency procedures and identify steps required to respond to emergencies
  • 1.4 Select and wear personal protective equipment according to site requirements
  • 1.5 Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
  • 1.6 Identify, address and report environmental issues, potential hazards and risks
  • 1.7 Select plant, tools and equipment required to carry out tasks and check for faults
  • 1.8 Identify, confirm, and locate materials required for work application
2. Erect fences
  • 2.1 Set out fence line and post positions according to job requirements
  • 2.2 Erect fence posts in place and plumb to alignment according to job requirements
  • 2.3 Fix fence rails and cladding or mesh to posts
  • 2.4 Finish fencing to completed construction condition requirements
3. Erect gates and signage
  • 3.1 Fit and secure gates according to job requirements
  • 3.2 Install signage at entry gates according to job requirements
4. Dismantle gates and fencing
  • 4.1 Dismantle fences and gates according to job requirements
  • 4.2 Remove dismantled gates and fencing from site
5. Conduct housekeeping activities
  • 5.1 Clear work area and dispose of or recycle materials according to site requirements
  • 5.2 Clean and maintain condition of equipment, confirm suitability for use, and address and report issues as required within scope of own role
  • 5.3 Manage and report hazards, and maintain a safe working environment
  • 5.4 Process records according to site requirements
No information
No information
Replaces
State Code National Code Title Type
WH088 RIICCM301D Construct and dismantle fences and gates Unit of competency
WH087 RIICCM211D Erect and dismantle temporary fencing and gates Unit of competency