Unit of competency Outline

Date retreived
22/07/2026 6:08 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Monitor and maintain automotive equipment

Monitor and maintain automotive equipment

Unit of competency
National Code
AUMATK003
State Code
WH911
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
11/03/2014
Nominal Hours
36
Description
This unit describes the performance outcomes required to monitor and maintain tools, equipment and machinery in an automotive environment.It involves monitoring the tools, equipment and machinery during operation, performing minor maintenance, and applying preventative maintenance procedures.It applies to those in an automotive and related component manufacturing environment and involves the application of skills and knowledge at a production worker level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Monitor operation
  • 1.1 Operation of tools, equipment and machinery is monitored in line with work health and safety (WHS) requirements to ensure they are performing according to job requirements and operator instructions
  • 1.2 Processes relevant to the task are monitored according to manufacturer specifications, workplace instructions and procedures
2. Perform minor maintenance
  • 2.1 Minor maintenance is performed on tools, equipment and machinery according to manufacturer specifications, workplace procedures and WHS requirements
  • 2.2 Maintenance requirements outside the range of operator expertise or responsibility are reported to appropriate personnel, according to workplace procedures
3. Apply preventative maintenance
  • 3.1 Tools, equipment and machinery used in the manufacturing process are checked according to workplace and manufacturer preventative maintenance procedures
  • 3.2 Identified requirements of tools, equipment and machinery are reported to appropriate personnel according to workplace procedures
4. Complete monitoring and maintenance procedures
  • 4.1 Equipment, tools, machinery and work areas are cleaned and maintained according to workplace procedures
  • 4.2 Faulty or damaged tools, equipment and machinery are identified, tagged and reported according to workplace procedures
  • 4.3. Workplace documentation and equipment maintenance reports are completed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE108 AUMATK3003 Monitor and maintain equipment, tools and machinery Unit of competency
Replaced By
State Code National Code Title Type
OAL53 AUMATK013 Monitor and maintain automotive equipment Unit of competency