Unit of competency Outline
Date retreived
22/07/2026 3:08 PM AWST
22/07/2026 3:08 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Fault find and repair simulator image generator and visual display systems
Fault find and repair simulator image generator and visual display systems
Unit of competency
National Code
DEFSIM003
DEFSIM003
State Code
AVP34
AVP34
TGA Status
Replaced
Replaced
DTWD Status
Transition (Replaced)
Transition (Replaced)
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
05/08/2016
Nominal Hours
0
Description
This unit describes the knowledge and skills required to conduct fault finding and repairs to the simulator image generator and visual display systems. This includes analysing fault reports, identifying and rectifying faults, conducting functional tests and the documentation and certification processes. In the context of this unit, simulators are used to replicate land, air, sea and undersea systems to facilitate training and development. Both software and hardware components may be involved. Image generator hardware components include commercial off-the-shelf systems, proprietary designed systems and high-end rack mount personal computers with engineering graphic cards installed. Image generator software components include proprietary software to process visual databases stored on the information gateway, under direction of simulators’ host computing system, to produce drive signals for the visual display, and/or commercial software.Maintenance tasks include fault finding hardware to line replacement at unit level, image and backup of software installation, configuration and updating.Visual display systems include liquid crystal display, digital light processing, liquid crystal on silicon, light emitting diode, organic light emitting diode, cathode ray tube and/or laser.Mechanisms include projection (direct and/or rear, including optics and display surfaces), and/or direct display (television, monitor). Maintenance tasks may include setup, fault finding, alignment of projectors, optics alignment and colour matching and balance.This unit was developed in a Defence environment but may be relevant to others who work in this field. The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Those undertaking this unit would work independently, or as part of a team, with minimal supervision, while performing complex tasks, including complex problem solving, in a limited range of contexts. They would use discretion and judgement and take responsibility for the quality of their outputs.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Receive and analyse fault report
- 1.1 Receive and analyse simulator image generator and/or visual display system fault report.
- 1.2 Identify and select appropriate fault finding method(s) that will apply across the range of simulator image generator and/or visual display system.
- 1.3 Prepare the simulator image generator and/or visual display system for fault finding.
2. Identify and find fault
- 2.1 Apply fault finding method(s).
- 2.2 Identify and analyse fault indicators.
- 2.3 Identify the simulator image generator and/or visual display system fault.
- 2.4 Confirm that the fault is the one initially reported.
3. Repair fault
- 3.1 Identify and confirm cause of fault.
- 3.2 Identify and confirm repair method(s).
- 3.3 Complete simulator image generator and/or visual display system repair.
- 3.4 Conduct post repair safety check.
- 3.5 Restart simulator image generator and/or visual display system.
4. Conduct functional test
- 4.1 Test simulator image generator and/or visual display system to ensure operational integrity.
- 4.2 Confirm operational parameters.
5. Finalise repair process
- 5.1 Finalise simulator image generator and/or visual display systemrepair reports including a detailed synopsis of the fault and the repair process and any certification requirements.
- 5.2 Report the operational status of the simulator image generator and/or visual display system.
No information
No information
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| ODA24 | DEFSIM017 | Fault find and repair simulator image generator and visual display systems | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWY7 | DEF43215 | Certificate IV in Simulator Maintenance | Qualification |