Unit of competency Outline

Date retreived
23/07/2026 3:42 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out basic levelling

Carry out basic levelling

Unit of competency
National Code
RIICCM208E
State Code
OCX91
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2021
View on TGA
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
040301 - Building Science And Technology
Original Release Date
18/06/2021
Nominal Hours
8
Description
This unit describes the skills and knowledge required to carry out basic levelling in civil construction, including establishing offsets to plans and drawings and setting up and using a levelling device. It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take some responsibility for the quality of work outcomes.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for basic levelling
  • 1.1 Obtain, interpret and confirm work requirements
  • 1.2 Access, interpret and apply documentation required to carry out basic levelling
  • 1.3 Obtain and interpret emergency procedures and identify steps required to respond to emergencies
  • 1.4 Select and wear personal protective equipment according to site requirements
  • 1.5 Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
  • 1.6 Identify, address and report environmental issues, potential hazards and risks
  • 1.7 Select plant, tools and equipment required to carry out tasks and check for faults
  • 1.8 Identify, confirm, and locate materials required for work application
2. Establish offsets to plans and drawings
  • 2.1 Establish offset and recovery pegs from survey controls to specified plans and drawings
  • 2.2 Re-establish earthwork and pavement control lines from offsets and/or recovery pegs
  • 2.3 Establish drainage offsets from survey control
3. Set up and use levelling device
  • 3.1 Identify heights to be transferred or established from project plans or instructions
  • 3.2 Set up and use levelling instruments and complete levelling according to job requirements
  • 3.3 Transfer heights from the known to the required
  • 3.4 Document results of levelling procedure according to site requirements
4. Conduct housekeeping activities
  • 4.1 Clear work area and dispose of or recycle materials according to site requirements
  • 4.2 Clean and maintain condition of equipment, confirm suitability for use, and address and report issues as required within scope of own role
  • 4.3 Manage and report hazards, and maintain a safe working environment
  • 4.4 Process records according to site requirements
No information
No information
Replaces
State Code National Code Title Type
WH084 RIICCM208D Carry out basic levelling Unit of competency