Unit of competency Outline
Date retreived
22/07/2026 3:24 PM AWST
22/07/2026 3:24 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Evaluate cost estimations and initiate appropriate solutions
Evaluate cost estimations and initiate appropriate solutions
Unit of competency
National Code
UEPOPS520
UEPOPS520
State Code
OAG05
OAG05
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
15/05/2019
Field of Education
031311 - Powerline Installation And Maintenance
Original Release Date
15/05/2019
Nominal Hours
36
Description
This unit involves the skills and knowledge required to evaluate estimated costs for planned and forced power generation plant outages (either a single item or whole unit) and to initiate appropriate solutions.An outage is when power generation plant and/or equipment is not available to perform its intended function. Forcedoutageis theshutdown of power generation plant, equipment or a power generation facility when a generatingunit is unavailable to producepowerdue to an unexpected breakdown.Competency in this unit requires the ability to evaluate work details, identify costs,develop solutions and complete documentation. Individuals will, in general, work under supervision, in a power generation facility as an operator with responsibility for maintenance budgets. No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Evaluate workdetails
- 1.1 Power generation plant outage work plan and methods are evaluated, in accordance with workplace procedures
- 1.2 Time frames for power generation plant outage work is identified, in accordance with workplace procedures
- 1.3 Details of materials, equipment, specialist services and contractual provisions are identified, in accordance with workplace procedures
- 1.4 Specific disposal requirements are evaluated, in accordance with workplace procedures
2 Identify costs
- 2.1 Costs associated with the planned and forced outages are evaluated, in accordance with workplace procedures
- 2.2 Previous planned and forced outages are analysed, in accordance with workplace procedures, to determine problems
3 Develop solutions
- 3.1 Potential solutions to limit time frame and budget over runs are identified, in accordance with workplace procedures
- 3.2 Potential variations in planned and forced outages scope of work are identified, in accordance with workplace procedures, and solutions are developed
4 Complete documentation
- 4.1 Evaluation report is produced, in accordance with workplace procedures
- 4.2 Possible increases in budget are documented, in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WE446 | UEPOPS520A | Evaluate cost estimations and initiate appropriate solutions | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| ODY75 | UEPOPS038 | Evaluate cost estimations and initiate appropriate solutions | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BEW6 | UET50219 | Diploma of ESI - Power Systems | Qualification |
| BHB0 | UET50221 | Diploma of ESI - Power Systems | Qualification |
| BEC3 | UEP50218 | Diploma of ESI Generation - Operations | Qualification |
| BEB7 | UEP50118 | Diploma of ESI Generation - Systems Operations | Qualification |
| BEB3 | UEP50318 | Diploma of ESI Generation (Maintenance) | Qualification |