Unit of competency Outline

Date retreived
22/07/2026 8:09 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Manually prepare and produce screen prints

Manually prepare and produce screen prints

Unit of competency
National Code
ICPSCP270
State Code
AUN87
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
80
Description
This unit describes the skills and knowledge required to manually prepare and produce screen prints using manual screening techniques for long print runs that involve a production process.It applies to individuals working under direct supervision and performing mainly routine tasks.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify job requirements
  • 1.1 Material safety data sheets (MSDS) are used to identify safe chemical handling procedures
  • 1.2 Substrate is checked for conformance to job specifications with any irregularities reported and/or rectified
  • 1.3 Ink is checked for conformance to job specifications
  • 1.4 Stencil is checked for conformance to job specifications
2 Prepare machine to print
  • 2.1 Substrate position and stencil registration are adjusted according to job specifications
  • 2.2 Ink is applied to screen in quantity required for screen size
  • 2.3 Equipment is kept clean and spillage is minimised
3 Produce proof print
  • 3.1 Proof print is run off and checked for colour, strength, registration, adhesion, clarity, gloss level, drying and curing, artwork detail and other technical aspects according to job specifications
  • 3.2 Adjustments are made according to product and machine specifications
  • 3.3 Belt speed and energy required are set to achieve desired curing or drying properties
  • 3.4 Appropriate approval to commence production is sought prior to commencement
4 Run job and monitor print quality
  • 4.1 Printing speed production is adjusted to maximise quality and output
  • 4.2 Print quality is continuously evaluated and adjusted as required
  • 4.3 Effects of ink alterations during run are monitored and any discrepancy is notified according to enterprise procedures
  • 4.4 Workplace documentation on job is completed as required
  • 4.5 Curing and drying are constantly monitored and adjusted according to manufacturer or supplier and job specifications
5 Carry out routine user maintenance
  • 5.1 Equipment is cleaned according to enterprise procedures
  • 5.2 Fault conditions are identified and reported according to enterprise procedures
6 Stack production output
  • 6.1 Output is checked for thorough drying and curing before stacking
  • 6.2 Job status and progress are checked for conformance to job specifications and any necessary action is taken
7 Conduct shutdown
  • 7.1 Material is transferred to correct destination in safe manner
  • 7.2 Excess ink, screens, squeegees and flood coaters are removed and cleaned according to work health and safety (WHS) requirements and manufacturer or supplier specifications
  • 7.3 Waste materials and chemicals are disposed of according to manufacturer or supplier specifications, regulatory requirements and enterprise procedures
  • 7.4 Equipment and surrounding areas are cleaned according to manufacturer or supplier specifications
  • 7.5 Tools and equipment are identified, stored and maintained according to manufacturer specifications to ensure ease of access and operator safety
  • 7.6 Correct procedure for dealing with spilt chemicals is demonstrated according to WHS requirements
No information
No information
Replaces
State Code National Code Title Type
D3220 ICPSP270C Manually prepare and produce screen prints Unit of competency
Replaced By
State Code National Code Title Type
OBQ51 ICPSCP2700 Manually prepare and produce screen prints Unit of competency