Unit of competency Outline

Date retreived
22/07/2026 3:02 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Restore a bicycle

Restore a bicycle

Unit of competency
National Code
AURB311401A
State Code
D7571
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
26/09/2011
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
26/09/2011
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to restore a used or vintage bicycle to fully functioning or original condition, where possible.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Identify requirements
  • 1.1. Check and confirm customer requirements in accordance with workplace procedures
  • 1.2. Research original bicycle components and specifications and access information
  • 1.3. Source suppliers and determine availability of original bicycle parts
  • 1.4. Source second hand parts and assess for suitability and serviceability
  • 1.5. Check tooling and equipment for availability and conformity with specifications and safe condition
2. Inspect bicycle
  • 2.1. Prepare work area and set up equipment and materials
  • 2.2. Inspect bicycle systems and components for faults and worn or damaged components using visual, aural and tactile inspections and measurements
  • 2.3. Compare conditions found with original bicycle specifications and customer requirements
  • 2.4. Identify restoration, replacement and repair options for bicycle components, including outsourcing
  • 2.5. Document and cost restoration items and obtain customer approval in accordance with workplace procedures
3. Restore bicycle
  • 3.1. Select and use tooling and equipment in accordance with occupational health and safety (OHS) requirements
  • 3.2. Dismantle bicycle, inspect and tag components
  • 3.3. Perform restoration operations on components using personal safety equipment and precautions to protect others in the workplace
  • 3.4. Outsource work as required, such as replating and repainting
  • 3.5. Reassemble bicycle and operate restored bicycle through its full range, noting test results, including non-conformity
  • 3.6. Check restored bicycle components, complete adjustments and prepare unit for delivery
4. Complete work and clean up
  • 4.1. Clean and store portable tooling and equipment in approved designated areas
  • 4.2. Complete workplace records, customer file and warranty information as required by enterprise
  • 4.3. Clean up work area and dispose of waste in accordance with workplace procedures
No information
No information
Replaced By
State Code National Code Title Type
WF045 AURBTA3005 Restore bicycles Unit of competency
No information