Unit of competency Outline

Date retreived
23/07/2026 4:55 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Erect and dismantle intermediate scaffolding

Erect and dismantle intermediate scaffolding

Unit of competency
National Code
CPCCSC3001
State Code
OCP85
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040329 - Scaffolding And Rigging
Original Release Date
01/06/2021
Nominal Hours
40
Description
This unit specifies the skills and knowledge required to safely erect and dismantle all types of tube and coupler scaffolding systems to provide work platforms for construction purposes and all work associated with modular scaffolding systems. Scaffolding systems include edge protection, access ways and falsework (scaffold support systems for formwork). It applies to workers erecting and dismantling a range of modular scaffolding systems who would be expected to take responsibility for organising and completing these tasks with a high degree of self direction. Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industry meets this requirement.Licensing, legislative, regulatory or certification requirements apply to this unit of competency in some states and territories. For further information, check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1 Plan and prepare to erect and dismantle intermediate scaffolding.
  • 1.1 Interpret work order and associated documentation and clarify requirements with relevant persons.
  • 1.2 Plan all work to comply with relevant legislation, regulations, standards, codes, work health and safety, environmental and workplace requirements.
  • 1.3 Select plant, tools and equipment required for work tasks, check for serviceability and rectify or report identified faults.
  • 1.4 Select and inspect scaffolding and components, and label and reject damaged components.
  • 1.5 Determine expected loading on scaffold and supporting structure using load tables and manufacturer specifications.
  • 1.6 Determine site access and egress routes.
2 Erect intermediate scaffolding.
  • 2.1 Erect required safety signage and barricades and fit personal protective equipment (PPE).
  • 2.2 Select sole board/base plate in accordance with regulatory and manufacturer requirements.
  • 2.3 Set out and erect scaffolding in accordance with regulatory and manufacturer requirements.
  • 2.4 Erect and install static lines as specified in accordance with regulatory requirements.
  • 2.5 Assemble and erect lifting device as specified.
3 Inspect, repair and alter erected intermediate scaffolding.
  • 3.1 Inspect erected tube and coupler scaffolding for damage, corrosion, wear and compatibility, and immediately isolate, label, tag and reject or replace faulty components.
  • 3.2 Check current use of scaffolding against original design and confirm that it is in accordance with regulations and specifications.
  • 3.3 Inspect and confirm scaffolding stability.
  • 3.4 Carry out alteration or repair as necessary and within own level of responsibility.
  • 3.5 Complete and date inspection log and handover certificate, ready for signing by a certified scaffolder.
4 Dismantle intermediate scaffolding.
  • 4.1 Isolate scaffolding with appropriate signage and barricades to ensure safe dismantling.
  • 4.2 Dismantle scaffolding, reversing procedure followed for erection.
5 Clean up.
  • 5.1 Clear work area and dispose of, reuse or recycle materials in accordance with regulatory and workplace requirements.
  • 5.2 Clean, check, maintain and store tools and equipment in accordance with manufacturer and workplace requirements.
No information
No information
Replaces
State Code National Code Title Type
W9500 CPCCSC3001A Erect and dismantle intermediate scaffolding Unit of competency
State Code National Code Title Type
BGD1 CPC30920 Certificate III in Scaffolding Qualification