Unit of competency Outline

Date retreived
22/07/2026 8:12 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate a multi-engine helicopter

Operate a multi-engine helicopter

Unit of competency
National Code
AVIY0082
State Code
OBB53
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
13/08/2019
View on TGA
State Implementation and Classification
Approved Date
17/12/2019
Field of Education
031505 - Aircraft Operation
Original Release Date
17/12/2019
Nominal Hours
60
Description
This unit involves the skills and knowledge required to operate a multi-engine helicopter in compliance with relevant regulatory requirements of the Civil Aviation Safety Authority (CASA) and national operating standards.It includes operating a multi-engine helicopter in all phases of flight, managing engine failures and malfunctions, performing a rejected take-off with engine failure, and conducting a go-around or missed approach with an engine failure.This unit addresses aviation technical skill requirements (physical, mental and task-management abilities) related to aircraft operational duties of flight crew and contributes to safe and effective performance in complex aviation operational environments.Operations are conducted as part of commercial and military aircraft activities across a variety of operational contexts within the Australian aviation industry.Work is performed independently or under limited supervision within a single-pilot or multi-crew environment.Licensing, legislative, regulatory or certification requirements are applicable to this unit.
Notes
Elements and Performance Criteria
1 Operate a multi-engine helicopter in all phases of flight
  • 1.1 Normal multi-engine helicopter operations on-ground and in-flight are conducted in accordance with workplace procedures and the aircraft flight manual (AFM)/pilot’s operating handbook (POH)
  • 1.2 Single engine operations contingencies for all phases of flight are anticipated and planned for
  • 1.3 Single engine operations contingency plan is briefed to crew members as required
2 Manage engine failure/malfunction
  • 2.1 Control of helicopter is maintained and/or regained
  • 2.2 Failed/malfunctioning engine is identified and confirmed
  • 2.3 Power set on serviceable engine/s and helicopter configuration is adjusted to achieve desired aircraft performance
  • 2.4 Failed/malfunctioning engine is managed
  • 2.5 Decision to continue or abort approach/landing is made
  • 2.6 Decision height for landing is nominated
  • 2.7 Indicated airspeed is maintained at or above minimum level flight speed for one inoperative engine
  • 2.8 Air traffic control (ATC) or another agency capable of assistance is advised of situation and intentions
  • 2.9 Flight profile is flown from which a controlled landing could be achieved
  • 2.10 Recovery to a suitable landing site is evaluated and conducted
3 Perform rejected take-off with engine failure
  • 3.1 Requirement for a rejected take-off is recognised
  • 3.2 Rejected take-off procedures are implemented
  • 3.3 Contingency power on remaining engine/s is applied as required
  • 3.4 Controlled landing in rejected take-off distance available is performed
4 Conduct go-around or missed approach with engine failure
  • 4.1 Requirement for a go-around or missed approach is identified and confirmed
  • 4.2 Control of helicopter is maintained and/or regained
  • 4.3 Engine inoperative go-around is performed from decision height
No information
No information
Replaces
State Code National Code Title Type
AVX30 AVIY5065 Operate a multi-engine helicopter Unit of competency