Unit of competency Outline
Date retreived
22/07/2026 8:47 AM AWST
22/07/2026 8:47 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Process glass by basic machines
Process glass by basic machines
Unit of competency
National Code
LMFGG2007B
LMFGG2007B
State Code
W8671
W8671
TGA Status
Deleted
Deleted
DTWD Status
Deleted
Deleted
State Implementation and Classification
Approved Date
11/06/2010
Field of Education
030717 - Plant And Machine Operations
Original Release Date
11/06/2010
Nominal Hours
48
Description
This unit covers the competency to cut, shape, drill and edge annealed glass up to and including 6mm thick and laminated glass up to and including 6.38mm thick.
Notes
Elements and Performance Criteria
1. Identify work requirements
- 1.1. Work requirements including materials, types of cuts, shapes and edges, processes and quantities required are identified from work instructions or job order in accordance with workplace procedures
- 1.2. Workplace health and safety requirements, including personal protection needs, are observed throughout the work
- 1.3. Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, of the appropriate quality, serviceable and in a safe condition
- 1.4. Cutting list and quality standards are determined and procedures identified in accordance with workplace requirements and industry standards
- 1.5. Glass to be cut, shaped, drilled or edged is selected using information from the work order, including type of glass, thickness, colour and dimensions
- 1.6. Machines, equipment and settings required to perform the work are identified
2. Prepare for work
- 2.1. Technique and sequence of work is planned to ensure processing is conducted in a logical order
- 2.2. Procedures for monitoring quality of materials, work in progress and finished items are identified in accordance with workplace requirements and industry practice
- 2.3. Suitable cutting, shaping, drilling, and edging machines are selected
- 2.4. Glass processing table is selected and work surface is cleared of debris and dust
- 2.5. Components and controls of machines including emergency stops and guards are identified and tested for working order
- 2.6. Work area is cleared of obstructions and potential hazards
- 2.7. Glass to be processed is located in the work area using appropriate handling techniques
- 2.8. Glass is measured accurately to minimise waste and within specified tolerances according to enterprise standards
- 2.9. Components and controls of machines including emergency stops and guards are identified and tested for working order
- 2.10. Glass is checked for imperfections and damage prior to handling
3. Conduct processing operations
- 3.1. Tools and equipment are operated and monitored in accordance with manufacturers' instructions and workplace procedures to ensure correct product quality and output
- 3.2. Glass is processed to required standard in accordance with job order, work instructions and procedures, including the performance of routine lubrication and adjustments of machines/equipment
- 3.3. Problems occurring during work operations are identified and reported to appropriate persons in accordance with enterprise procedures
- 3.4. Waste quantities are checked to ensure that they are within allowable limits
- 3.5. Authorised changes in working procedures are followed
- 3.6. Completed product is inspected for quality of work and repaired, reprocessed or discarded in accordance with workplace procedures
4. Complete work
- 4.1. Processed glass is labelled and stored following workplace procedures ensuring there are no projections
- 4.2. Scraps and off-cuts are removed for disposal or recycling as required
- 4.3. Work area clean up is completed following workplace procedures
- 4.4. Equipment is cleaned and stored according to workplace requirements
- 4.5. Workplace documentation is completed in accordance with workplace requirements
- 4.6. Tools, equipment and unused materials are removed and stored appropriately
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
This unit covers work involving cutting, shaping, drilling and/or edging of glass by basic machines
Work requires individuals to demonstrate discretion, judgement and problem solving skills in determining the appropriate techniques, methods and equipment to be used to process glass by basic machines. This may be demonstrated either individually or in a team environment
OHS requirements may include legislation, building codes, material safety management systems, hazardous substance and dangerous goods codes and local safe operating procedures
Work is carried out in accordance with statutory requirements, environment legislation, manual handling procedures and relevant regulations and organisation insurance requirements
Glass is:
annealed glass less than or equal to 6mm thick
laminated glass less than or equal to 6.38mm thick
Glass processing includes:
straight cutting
circle cutting
freehand cutting
drilling and edging
Edging may include:
arrising
flat
round and mitre grinding
flat
round and mitre polishing and bevelling
Tools and equipment may include:
flat felt covered cutting tables
tungsten wheel glass cutters
speed cutters
circle cutters
L-squares and straight edges
tape measures
glass handling gloves
safety glasses
gauntlets
aprons
marking pens
chinagraph pencils
templates and lubricants
Tables appropriate for cutting large glass sheets include:
air flotation tables
roller castor tables or tilt tables with air flotation
breaker bars or roller castors
Edging equipment may include but is not limited to:
finishing or belt machines
diamond or pencil edgers
pumice or cork polishers
horizontal wheels
finger slotters and hand tools
Drilling equipment may include, but is not limited to:
portable
wall-mounted and free-standing diamond drill presses and saws
Materials are to include but are not limited to:
annealed and laminated glass for residential and commercial glazing and furniture applications
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulation and Australian Standard policies and practices. It may include:
gloves
safety glasses
gauntlets
footwear
earmuffs
aprons and overalls
Information and procedures
Machine manufacturer specifications and operational procedures
Workplace procedures relating to the setting and operation of glass cutting, drilling and edging machines
Work instructions, including job sheets, cutting lists and plans
Safety standards include personal protective equipment, OHS regulations and enterprise requirements
AS4667 Quality requirements for cut to size and processed glass
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
This unit covers work involving cutting, shaping, drilling and/or edging of glass by basic machines
Work requires individuals to demonstrate discretion, judgement and problem solving skills in determining the appropriate techniques, methods and equipment to be used to process glass by basic machines. This may be demonstrated either individually or in a team environment
OHS requirements may include legislation, building codes, material safety management systems, hazardous substance and dangerous goods codes and local safe operating procedures
Work is carried out in accordance with statutory requirements, environment legislation, manual handling procedures and relevant regulations and organisation insurance requirements
Glass is:
annealed glass less than or equal to 6mm thick
laminated glass less than or equal to 6.38mm thick
Glass processing includes:
straight cutting
circle cutting
freehand cutting
drilling and edging
Edging may include:
arrising
flat
round and mitre grinding
flat
round and mitre polishing and bevelling
Tools and equipment may include:
flat felt covered cutting tables
tungsten wheel glass cutters
speed cutters
circle cutters
L-squares and straight edges
tape measures
glass handling gloves
safety glasses
gauntlets
aprons
marking pens
chinagraph pencils
templates and lubricants
Tables appropriate for cutting large glass sheets include:
air flotation tables
roller castor tables or tilt tables with air flotation
breaker bars or roller castors
Edging equipment may include but is not limited to:
finishing or belt machines
diamond or pencil edgers
pumice or cork polishers
horizontal wheels
finger slotters and hand tools
Drilling equipment may include, but is not limited to:
portable
wall-mounted and free-standing diamond drill presses and saws
Materials are to include but are not limited to:
annealed and laminated glass for residential and commercial glazing and furniture applications
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulation and Australian Standard policies and practices. It may include:
gloves
safety glasses
gauntlets
footwear
earmuffs
aprons and overalls
Information and procedures
Machine manufacturer specifications and operational procedures
Workplace procedures relating to the setting and operation of glass cutting, drilling and edging machines
Work instructions, including job sheets, cutting lists and plans
Safety standards include personal protective equipment, OHS regulations and enterprise requirements
AS4667 Quality requirements for cut to size and processed glass
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work orders and plan processing operations
Identify the materials, patterns/plans, processes, machines, equipment and settings to undertake a glass cutting, drilling, shaping and/or edging task by basic machines
Apply safe handling requirements for machines, equipment, products and materials, including use of personal protective equipment
Apply AS4667 Quality requirements for cut to size and processed glass
Set up for and prepare to process glass
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
As a minimum, demonstrate the ability to:
identify and use AS4667 Quality requirements for cut-to-size and processed glass
complete straight cuts, simple shapes, truncated and radius corners, circles, fan holes, pay holes and ovals in glass up to 6 mm annealed and 6.38 mm laminated glass up to 1.0 m 2
cut 6 mm annealed and 6.38 mm laminated glass using a diamond saw
arris, grind and polish flat, round and mitre edges on 6 mm annealed and 6.38 mm laminated glass up to 0.5 m 2
drill holes with tungsten and diamond drill bits in 6 mm annealed and 6.38 mm laminated glass up to 0.5 m 2
calculate the cost of glass and edgework
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Glass sheet/product, processing facilities/equipment (such as basic cutting and edging machines), table, work area, work orders and appropriate safety and personal protection equipment.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment may be in conjunction with assessment of other relevant units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant glass processing machines, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work orders and plan processing operations
Identify the materials, patterns/plans, processes, machines, equipment and settings to undertake a glass cutting, drilling, shaping and/or edging task by basic machines
Apply safe handling requirements for machines, equipment, products and materials, including use of personal protective equipment
Apply AS4667 Quality requirements for cut to size and processed glass
Set up for and prepare to process glass
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
As a minimum, demonstrate the ability to:
identify and use AS4667 Quality requirements for cut-to-size and processed glass
complete straight cuts, simple shapes, truncated and radius corners, circles, fan holes, pay holes and ovals in glass up to 6 mm annealed and 6.38 mm laminated glass up to 1.0 m 2
cut 6 mm annealed and 6.38 mm laminated glass using a diamond saw
arris, grind and polish flat, round and mitre edges on 6 mm annealed and 6.38 mm laminated glass up to 0.5 m 2
drill holes with tungsten and diamond drill bits in 6 mm annealed and 6.38 mm laminated glass up to 0.5 m 2
calculate the cost of glass and edgework
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Glass sheet/product, processing facilities/equipment (such as basic cutting and edging machines), table, work area, work orders and appropriate safety and personal protection equipment.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment may be in conjunction with assessment of other relevant units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant glass processing machines, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0318 | LMFGG2007A | Process glass by basic machines | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7813 | LMFGG2007C | Process glass by basic machines | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W024 | LMF20402 | Certificate II in Glass and Glazing | Qualification |
| W034 | LMF30602 | Certificate III in Glass and Glazing | Qualification |
| 1477 | 52262 | Certificate II in Glass Processing | Accredited course |