Unit of competency Outline

Date retreived
22/07/2026 9:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install, operate and troubleshoot medium enterprise routers

Install, operate and troubleshoot medium enterprise routers

Unit of competency
National Code
ICTNWK507
State Code
AUV08
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
25/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
031305 - Computer Engineering
Original Release Date
16/09/2015
Nominal Hours
120
Description
This unit describes the skills and knowledge required to use the appropriate tools, equipment, software and protocols to install, operate and troubleshoot, medium enterprise routers.It applies to individuals working as network technicians, network administrator and network support.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to install a medium enterprise router
  • 1.1 Prepare for given work, according to legislation, workplace health and safety (WHS), codes, regulations and standards
  • 1.2 Arrange the access to the network facility, according to the required procedures
  • 1.3 Review the existing network design documentation to ensure that it is current and complete
  • 1.4 Select the network elements required to be installed, to meet the technical requirements
  • 1.5 Contact vendors and service suppliers to obtain the specifications, and determine the availability of the identified components
  • 1.6 Develop plans, with prioritised tasks and contingency arrangements, for the installation of components with minimum disruptions to the client
  • 1.7 Liaise with the appropriate person to obtain approval for the plans, including security and timing
2. Configure the basic router operation
  • 2.1 Determine the basic routing requirements
  • 2.2 Determine the router operating parameters
  • 2.3 Select the appropriate media, cables, ports, and connectors to connect routers to other network devices and hosts
  • 2.4 Access and use the router to set basic parameters
  • 2.5 Upgrade the firmware on a router
  • 2.6 Save and back up the router configuration files
  • 2.7 Implement basic router security
  • 2.8 Configure the static and default routes
3. Configure, and verify, the dynamic classless routing protocols
  • 3.1 Determine the appropriate classless addressing scheme, using variable length subnet mapping (VLSM) and summarisation to satisfy addressing requirements in a local area network (LAN) or a wide area network (WAN) environment
  • 3.2 Calculate and apply an addressing scheme, including a VLSM internet protocol (IP) addressing design, to a network
  • 3.3 Configure and verify, the classless routing protocols
4. Apply sound troubleshooting processes to determine network connectivity
  • 4.1 Troubleshoot the device configuration and network connectivity using basic utilities
  • 4.2 Identify and correct, common problems associated with IP addressing and host configurations
  • 4.3 Perform basic troubleshooting principles to verify the network’s operation
No information
No information
Replaces
State Code National Code Title Type
D7958 ICANWK507A Install, operate and troubleshoot medium enterprise routers Unit of competency
Replaced By
State Code National Code Title Type
OBT59 ICTNWK542 Install, operate and troubleshoot medium enterprise routers Unit of competency