Unit of competency Outline

Date retreived
22/07/2026 7:08 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Develop integrated digital reception systems

Develop integrated digital reception systems

Unit of competency
National Code
ICTDRE305
State Code
AWE52
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031307 - Communications Technologies
Original Release Date
05/07/2016
Nominal Hours
35
Description
This unit describes the skills and knowledge required to develop integrated digital reception system applications, topologies, devices and capabilities, and system programming methods; as well as use diagnostic tools and documentation of developed systems.It applies to cablers who install emerging digital reception equipment and cabling systems for domestic and small to medium enterprise information technologies. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to develop an integrated system
  • 1.1 Determine types and location of loads and control devices from project specifications and customer requirements
  • 1.2 Determine number of control bus networks and current requirements from load calculations for devices on the system
  • 1.3 Determine appropriate placement of system devices to optimise bus network power and load parameters, and maintain system stability
  • 1.4 Develop an integrated system to comply with regulator, safety and manufacturer requirements
  • 1.5 Document take-off of the number of devices and accessories required for the system, using manufacturer's title and ID for each
  • 1.6 Download required programming and diagnostic tools to a compatible PC and check for correct operation and safety
2. Program integrated system devices
  • 2.1 Follow work health and safety (WHS) risk control measures and procedures
  • 2.2 Apply correct modes of programming to develop an integrated system according to manufacturer's programming software instructions
  • 2.3 Follow manufacturer's instructions and recommendations when programming system devices to project requirements
  • 2.4 Program parameters for operation of loads to project requirements and within manufacturer's designated range
  • 2.5 Save and backup the programmed system database according to manufacturer instructions
3. Load and test integrated system
  • 3.1 Follow WHS risk control work measures and procedures
  • 3.2 Transfer database of integrated system program to network
  • 3.3 Test all functions of the integrated system for compliance with project requirements and manufacturer specifications
  • 3.4 Use diagnostic tools to locate system faults, defects and anomalies
  • 3.5 Correct defects and anomalies to comply with project requirements and manufacturer specifications
  • 3.6 Provide copy of documentation of integrated system at handover to customer
No information
No information
Replaces
State Code National Code Title Type
WI894 ICTDRE3249A Develop integrated digital reception systems Unit of competency