Unit of competency Outline
Date retreived
22/07/2026 9:24 AM AWST
22/07/2026 9:24 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Manage environmental compliance in the mechanical repair industry
Manage environmental compliance in the mechanical repair industry
Unit of competency
National Code
AURTEA4001
AURTEA4001
State Code
WF366
WF366
TGA Status
Deleted
Deleted
DTWD Status
Deleted
Deleted
State Implementation and Classification
Approved Date
08/08/2013
Field of Education
050999 - Environmental Studies, N.e.c.
Original Release Date
08/08/2013
Nominal Hours
40
Description
This unit covers the competence to plan and implement a management system ensuring the protection of the environment in a mechanical repair business.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Plan and manage compliance with environmental regulations
- 1.1. Reasons for ethical environmental practice in an automotive workplace or business are identified.
- 1.2. Environmental responsibilities of employers and staff in an automotive workplace or business are identified.
- 1.3. Penalties for company and individual breaches of the legislation are identified.
- 1.4. Waste products are minimised and facilities provided for waste materials to be stored in bins for recycling or disposal.
- 1.5. Collection and recycling arrangements are implemented for liquids, sludge, solids and other waste.
- 1.6. Suppliers with minimal excess packaging on goods received are sourced.
- 1.7. Packaging on goods received is sorted and disposed of appropriately.
- 1.8. Waste and energy conservation strategies are identified and implemented strategies are identified and implemented.
2. Manage potential hazards to stormwater systems to avoid contamination
- 2.1. Systems are in place to ensure waste water does not enter the stormwater system.
- 2.2. All drains and flows are identified on a site map directly indicating where they flow.
- 2.3. Appropriate trade waste permits are in place.
- 2.4. Impervious paved, undercover and bunded or drained areas are provided and used for surface cleaning and preparation.
- 2.5. Undercover and bunded or drained areas are provided and used for the storage of all materials, parts and components containing environmentally hazardous substances.
- 2.6. Clearly identifiable storage or recycling containers are provided for all liquid wastes.
- 2.7. Oil/water separator and pits are cleaned and maintained regularly as per manufacturer/component supplier specifications.
- 2.8. Approved parts washer is supplied and maintained in a manner ensuring no contamination occurs.
- 2.9. Spill kit is provided and used as needed to prevent stormwater contamination by staff trained in its use.
- 2.10. Workplace is kept clean to prevent unintentional stormwater pollution.
3. Manage potential hazards to air quality to avoid contamination
- 3.1. Hazards to airborne particles are identified, minimised and contained.
- 3.2. Hazards to gases and fumes are identified, minimised and contained.
- 3.3. Systems are in place and implemented to ensure vehicle exhausts and emissions are minimised are not permitted to collect in the workplace.
- 3.4. A well-ventilated area is provided for welding activities.
4. Minimisation of noise hazards is planned and managed
- 4.1. Noise creating activities are minimised and carried out within approved operating hours.
- 4.2. Fixed machinery is fitted with silencers or surrounded by noise containment material.
5. Management systems
- 5.1. An environmental policy and contingency plan suitable to the needs of the business is developed and implemented.
- 5.2. Waste to landfill is calculated and possible savings through reuse and recycling are calculated.
- 5.3. Payback period on environmental equipment is calculated.
- 5.4. Staff adherence to environmental responsibilities is managed.
- 5.5. Environmental records are accurately and legibly maintained and stored securely in a form accessible for reporting procedures.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
Work is carried out in accordance with legislative obligations, environmental legislation, health regulations, manual handling procedures and organisation insurance requirements.
Competence may be demonstrated in any mechanical workplace or business
WHS
WHS requirements include legislation, material safety data sheets, hazardous substances and dangerous goods code and safe operating procedures
Tooling and equipment
Tooling and equipment are to include spill kits, recycling bins and drums, bunded or drained wash bays and preparation areas, parts washers, quick break degreasing compounds, waste water management system.
Tooling and equipment may include containment facilities for hazardous substances and staff environmental induction materials.
Materials
Materials may include:
material safety data sheets, manufacturer/ component supplier specifications, environmental records, costing of equipment and waste removal
containment facilities for hazardous substances
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices.
Information and procedures
Information and procedures may include:
environmental legislation, regulations and advice
workplace procedures relating to the use of tooling and equipment
work instructions and procedures
site environmental policy
workplace procedures relating to reporting and communication
manufacturer/component supplier specifications and operational procedures
local council and waterways regulations
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
Work is carried out in accordance with legislative obligations, environmental legislation, health regulations, manual handling procedures and organisation insurance requirements.
Competence may be demonstrated in any mechanical workplace or business
WHS
WHS requirements include legislation, material safety data sheets, hazardous substances and dangerous goods code and safe operating procedures
Tooling and equipment
Tooling and equipment are to include spill kits, recycling bins and drums, bunded or drained wash bays and preparation areas, parts washers, quick break degreasing compounds, waste water management system.
Tooling and equipment may include containment facilities for hazardous substances and staff environmental induction materials.
Materials
Materials may include:
material safety data sheets, manufacturer/ component supplier specifications, environmental records, costing of equipment and waste removal
containment facilities for hazardous substances
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices.
Information and procedures
Information and procedures may include:
environmental legislation, regulations and advice
workplace procedures relating to the use of tooling and equipment
work instructions and procedures
site environmental policy
workplace procedures relating to reporting and communication
manufacturer/component supplier specifications and operational procedures
local council and waterways regulations
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Plan and manage safe handling requirements for equipment, products and materials, including use of personal protective equipment.
Plan and manage environmental protection procedures in the business.
Identify materials used in process in the business, and assess and manage their environmental impact.
Ensure effective recycling processes are in place.
Plan and manage work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self and others,
maintain a clean workplace,
prevent wastage and damage to goods, equipment and products,
dispose of waste in accordance with legislative requirements and best practice,
maintain required production output and product quality.
Report significant environmental damage or spills.
Plan and manage operator maintenance on equipment to ensure environmental efficiency.
Manage effective planning and team work related to environmental best practice.
Develop/implement or audit an existing business environmental policy covering, at a minimum: waste, recycling, hazards to stormwater, air quality, noise, energy minimisation and costs.
Modify activities to cater for variations in workplace context and environment.
Context of, and specific resources for assessment
Assessment may occur on the job or in a workplace simulated facility with process equipment, materials, work instructions and deadlines.
Access to an automotive mechanical workplace or business with a range of vehicles or mechanical components, waste materials of various types, recycling bins, spill kits, quick break degreasing agents, oil/water separator for liquids, sludge, solids and other waste.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and should be in conjunction with assessment of other units of competence.
Assessment of this unit of competence is most likely to be project related under real or simulated conditions and require portfolios or other forms of indirect evidence of process. Direct evidence may include certification of compliance of the final outcome/product or authorisation for use by a component authority.
Assessment must confirm the inference that competence is able not only to be satisfied under the particular circumstances, but is able to be transferred to other circumstances.
Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Plan and manage safe handling requirements for equipment, products and materials, including use of personal protective equipment.
Plan and manage environmental protection procedures in the business.
Identify materials used in process in the business, and assess and manage their environmental impact.
Ensure effective recycling processes are in place.
Plan and manage work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self and others,
maintain a clean workplace,
prevent wastage and damage to goods, equipment and products,
dispose of waste in accordance with legislative requirements and best practice,
maintain required production output and product quality.
Report significant environmental damage or spills.
Plan and manage operator maintenance on equipment to ensure environmental efficiency.
Manage effective planning and team work related to environmental best practice.
Develop/implement or audit an existing business environmental policy covering, at a minimum: waste, recycling, hazards to stormwater, air quality, noise, energy minimisation and costs.
Modify activities to cater for variations in workplace context and environment.
Context of, and specific resources for assessment
Assessment may occur on the job or in a workplace simulated facility with process equipment, materials, work instructions and deadlines.
Access to an automotive mechanical workplace or business with a range of vehicles or mechanical components, waste materials of various types, recycling bins, spill kits, quick break degreasing agents, oil/water separator for liquids, sludge, solids and other waste.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and should be in conjunction with assessment of other units of competence.
Assessment of this unit of competence is most likely to be project related under real or simulated conditions and require portfolios or other forms of indirect evidence of process. Direct evidence may include certification of compliance of the final outcome/product or authorisation for use by a component authority.
Assessment must confirm the inference that competence is able not only to be satisfied under the particular circumstances, but is able to be transferred to other circumstances.
Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W5104 | AURT471782A | Plan and manage compliance with environmental regulations in the mechanical repair industry | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J419 | AUR40612 | Certificate IV in Automotive Electrical Technology | Qualification |
| J417 | AUR40412 | Certificate IV in Automotive Performance Enhancement | Qualification |