Unit of competency Outline

Date retreived
22/07/2026 8:09 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use scanning equipment for timber grading

Use scanning equipment for timber grading

Unit of competency
National Code
FWPCOT3293
State Code
OBM36
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
29/05/2020
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2020
Nominal Hours
35
Description
This unit of competency describes the skills and knowledge required to set up, test, operate and maintain different forms of scanning equipment for timber grading. The unit applies to individuals who use scanning equipment for timber grading used in sawmilling operations.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to operate scanning equipment for timber grading
  • 1.1 Review work order to determine job requirements and, where required, seek clarification from appropriate personnel
  • 1.2 Review workplace health and safety procedures, including the use of personal protective equipment, equipment lock-out and safe manual handling techniques
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with using scanning equipment for timber grading
  • 1.4 Identify workplace environmental protection procedures for minimising and disposing of waste material, cleaning tools and equipment, and maximising energy efficiency
  • 1.5 Consult with appropriate personnel to ensure that work is coordinated effectively with others in the workplace
  • 1.6 Obtain type and quantity of timber for grading from a storage location
2. Set up and test scanning equipment for timber grading
  • 2.1 Determine settings for scanning equipment according to work order and manufacturer instructions
  • 2.2 Identify relevant reference materials on the scanning equipment and use as required
  • 2.3 Identify the prerequisites for effective testing of scanning equipment
  • 2.4 Conduct test run to check the operation of scanning equipment and accuracy of grading outcomes
  • 2.5 Compare test results with actual data to confirm that scanning equipment is providing accurate grading outcomes
  • 2.6 Make adjustments to equipment settings as required
  • 2.7 Record all testing data accurately according to workplace and manufacturer requirements
3.Operate, monitor and troubleshoot scanning equipment for timber grading
  • 3.1 Carry out equipment start-up procedures according to manufacturer instructions
  • 3.2 Operate equipment according to designed capacity and manufacturer recommendations
  • 3.3 Perform routine operational checks on the performance of the scanning equipment according to workplace, safety and manufacturer procedures
  • 3.4 Withdraw sample products for independent testing and comparison with grading determined by scanning equipment, investigate anomalies, identify root causes and implement solutions
  • 3.5 Identify problems with the operation of scanning equipment, and resolve or report to the appropriate person
  • 3.6 Complete equipment shut-down procedures
4. Finalise operation and maintain equipment
  • 4.1 Follow workplace safety procedures to lock out equipment
  • 4.2 Perform routine maintenance according to workplace and manufacturer instructions
  • 4.3 Record and report grading outcomes, equipment faults and maintenance outcomes to appropriate personnel
No information
No information
No information