Unit of competency Outline

Date retreived
22/07/2026 7:32 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and terminate extra low voltage wiring systems

Install and terminate extra low voltage wiring systems

Unit of competency
National Code
AHCINF308
State Code
OFB14
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
24/01/2023
View on TGA
State Implementation and Classification
Approved Date
09/06/2023
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
09/06/2023
Nominal Hours
55
Description
This unit of competency describes the skills and knowledge required to install wiring enclosures, cable support systems, cables and accessories in electrical systems of 36 volts or less.The unit applies to individuals who install and terminate extra low voltage wiring systems under broad direction, and take responsibility for their own work.All work must be carried out to comply with workplace procedures, health and safety in the workplace requirements and manufacturer specifications.Licensing, legislative, regulatory or certification requirements may apply in some jurisdictions to installing and terminating extra low voltage wiring systems. User are advised to check with the relevant state or territory regulatory authority.
Notes
Elements and Performance Criteria
1. Plan and prepare for installation of extra low voltage wiring
  • 1.1 Plan and prepare installation to ensure policies and procedures are followed, and the work is appropriately sequenced according to requirements
  • 1.2 Consult with appropriate personnel to ensure the work is coordinated effectively with others on the work site
  • 1.3 Size cables and wires to suit calculated load
  • 1.4 Check wiring system components against job requirements
  • 1.5 Source accessories according to workplace procedures and to comply with workplace and task requirements
  • 1.6 Determine location where specific items of accessories, apparatus and circuits are to be installed from job requirements
  • 1.7 Obtain materials necessary to complete the work according to workplace procedures, and check against the job requirement
  • 1.8 Source tools, equipment and testing devices needed to carry out the installation work, and check for correct operation and safety
  • 1.9 Check preparatory work to ensure that it complies with workplace requirements
2. Install wiring systems
  • 2.1 Follow workplace health and safety policies and procedures for installing electrical wiring systems
  • 2.2 Select, fit, use and maintain personal protective equipment (PPE) applicable to the task
  • 2.3 Install wiring systems to meet requirements without damage or distortion to the surrounding environment or services
  • 2.4 Terminate accessories and connect wire as required to solenoids and controllers, according to manufacturer and workplace requirements
  • 2.5 Obtain approval from appropriate personnel before implementing any contingencies
  • 2.6 Undertake ongoing checks of the quality of work according to workplace procedures
3. Check and notify completion of work
  • 3.1 Undertake final checks to ensure the installed wiring systems conform to requirements
  • 3.2 Test system for correct operation
  • 3.3 Report completion of work according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
BAM97 AHCINF304 Install and terminate extra low voltage wiring systems Unit of competency