Unit of competency Outline
Date retreived
22/07/2026 7:38 AM AWST
22/07/2026 7:38 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Produce angled and curved furniture using solid timber
Produce angled and curved furniture using solid timber
Unit of competency
National Code
LMFFM3004B
LMFFM3004B
State Code
W8613
W8613
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
19/09/2008
Field of Education
030113 - Cabinet Making
Original Release Date
19/09/2008
Nominal Hours
64
Description
This unit covers the competency to construct and assemble furniture using angular construction methods
Notes
Elements and Performance Criteria
1. Prepare for work
- 1.1. Work instructions are used to determine job requirements, including design, tolerances, process, materials, finish and quantity
- 1.2. Construction and assembly sequence are planned
- 1.3. Procedures are determined for checking quality at each stage of the process
- 1.4. Workplace health and safety requirements, including personal protection needs, are observed throughout the work
- 1.5. Suitable work area is selected for the task
- 1.6. Preparatory drawings and set-outs for tasks are completed
- 1.7. Cutting list for components is developed
- 1.8. Materials are selected following work instructions
- 1.9. Tools and equipment suitable for construction are identified and checked for safe and effective operation
2. Complete construction
- 2.1. Materials are set out and prepared according to work instructions and components are marked according to industry practices
- 2.2. Tools, machines and equipment are used in accordance with safety requirements and manufacturers' specifications
- 2.3. Materials are bent and formed in accordance with the plan
- 2.4. Components are manufactured and checked against set-outs for tolerances, fit and accuracy
- 2.5. Components are assembled and checked against set-outs for accuracy, fit, twist and distortion
- 2.6. Doors, drawers and shelves are assembled and fitted
- 2.7. Product is prepared for final finish, including the removal of bruises, scratches, dents and marks
- 2.8. Product is checked against plans at identified checkpoints
3. Finalise operation
- 3.1. Faulty and/or defective equipment is tagged and reported in accordance with workplace practices
- 3.2. Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
- 3.3. Off-cuts and unused materials are collected and stored for reuse reuse or disposed following workplace procedures
- 3.4. Waste and scrap materials are dealt with following workplace procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Furniture
Manufactured solid timber furniture is to include, at a minimum, angular structures and curved cabinets incorporating rails and oval design
Material bending and forming techniques are to include:
steam/heat and bend
and groove and bend
Unit scope
Work involves reading and interpreting plans, developing set-outs, preparing and using jigs, templates and shaped cauls, using hand and/or power tools and equipment and operating woodworking machinery
Unit context
OH&S requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Competency may be demonstrated in workplaces involved in the manufacture of solid timber domestic furniture, commercial furniture and/or furniture components
Tools and equipment may include, but are not limited to:
measuring tapes or rulers
hammers
mallets
squares
bevels
chisels
planes
hand saws
power saws
power drills/screwdrivers
pneumatic tools
clamps
screwdrivers
pincers
Machines may include, but are not limited to:
band saws
cross cut saws
mitre saws
panel and rip saws
surface planers
panel planers
belt sanders
horizontal borers
vertical
drill presses
dovetailers
pedestal grinders
wood turning lathes
veneer guillotines and presses
Materials to be used may include but are not limited to:
timber
adhesives
screws
nails
dowels
knockdown fittings
glass
decorative finishes
abrasive paper and finishing materials
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, cutting lists, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturers' specifications and operational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Furniture
Manufactured solid timber furniture is to include, at a minimum, angular structures and curved cabinets incorporating rails and oval design
Material bending and forming techniques are to include:
steam/heat and bend
and groove and bend
Unit scope
Work involves reading and interpreting plans, developing set-outs, preparing and using jigs, templates and shaped cauls, using hand and/or power tools and equipment and operating woodworking machinery
Unit context
OH&S requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Competency may be demonstrated in workplaces involved in the manufacture of solid timber domestic furniture, commercial furniture and/or furniture components
Tools and equipment may include, but are not limited to:
measuring tapes or rulers
hammers
mallets
squares
bevels
chisels
planes
hand saws
power saws
power drills/screwdrivers
pneumatic tools
clamps
screwdrivers
pincers
Machines may include, but are not limited to:
band saws
cross cut saws
mitre saws
panel and rip saws
surface planers
panel planers
belt sanders
horizontal borers
vertical
drill presses
dovetailers
pedestal grinders
wood turning lathes
veneer guillotines and presses
Materials to be used may include but are not limited to:
timber
adhesives
screws
nails
dowels
knockdown fittings
glass
decorative finishes
abrasive paper and finishing materials
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, cutting lists, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturers' specifications and operational procedures
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment or products
maintain required production output and product quality
Produce a minimum of two significant timber products which must include:
one curved cabinet with rails, and
one item involving oval design using traditional construction methods and jointing
Conduct operator maintenance on machines and related tools and equipment
Work effectively with others
Modify activities to cater for variations in workplace context and environment
Resource Implications
Access to plans, hand and/or power tools, equipment, cauls and jigs, woodworking machinery, materials, and a work area.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competency.
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment or products
maintain required production output and product quality
Produce a minimum of two significant timber products which must include:
one curved cabinet with rails, and
one item involving oval design using traditional construction methods and jointing
Conduct operator maintenance on machines and related tools and equipment
Work effectively with others
Modify activities to cater for variations in workplace context and environment
Resource Implications
Access to plans, hand and/or power tools, equipment, cauls and jigs, woodworking machinery, materials, and a work area.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competency.
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0287 | LMFFM3004A | Produce angled and curved furniture using solid timber | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI425 | MSFFM3004 | Produce angled and curved furniture using solid timber | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W031 | LMF30302 | Certificate III in Furniture Making | Qualification |
| W032 | LMF30402 | Certificate III in Furniture Making (Cabinet Making) | Qualification |
| W033 | LMF30502 | Certificate III in Furniture Making (Wood Machining) | Qualification |
| W035 | LMF30702 | Certificate III in Mattress and Base Making | Qualification |