Unit of competency Outline
Date retreived
23/07/2026 5:35 AM AWST
23/07/2026 5:35 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Evaluate and select bodywork materials, equipment and processes
Evaluate and select bodywork materials, equipment and processes
Unit of competency
National Code
AURVTN5034
AURVTN5034
State Code
WF519
WF519
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
08/07/2013
Field of Education
030509 - Automotive Body Construction
Original Release Date
08/07/2013
Nominal Hours
36
Description
This unit covers the competence to research and evaluate the full range of bodywork materials, equipment and processes and to select that most appropriate for each particular specified application taking into account evolving technology and market needs.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Determine bodywork requirements
- 1.1. Requirements for bodywork activities are identified.
- 1.2. A framework and rating system is developed to facilitate comparisons of cost/benefits and other qualitative properties of materials, equipment and processes.
2. Gather data and specifications
- 2.1. Current best practice and future trends for undertaking bodywork are assessed to establish comparisons and benchmarks.
- 2.2. Steps required for bodywork processes are identified and flow charts produced, where necessary.
- 2.3. Specifications are identified to match each bodywork process.
- 2.4. Consultations are conducted with staff and management to identify additional or altered specifications.
- 2.5. Materials, tooling, and/or equipment requirements for the bodywork are identified and documented.
- 2.6. Existing materials, equipment and stock on hand is evaluated to match requirements of the proposed processes.
- 2.7. WHS requirements to provide safe work systems for the materials, equipment and processes are identified.
- 2.8. Data is compiled and documented.
3. Evaluate materials, equipment and processes against requirements
- 3.1. Materials are assessed for required quality, finish and conformity to standards.
- 3.2. Equipment options are identified.
- 3.3. Materials, equipment and processes are selected based on comparisons of performance, cost and specifications compared to the prepared rating system.
- 3.4. Processes are documented to enterprise and industry standards.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
WHS requirements include legislation, vehicle industry regulations, safety management systems, hazardous substances and dangerous goods code, and safe operating procedures.
Work is carried out in accordance with legislative obligations, Australian Design Rules, environmental legislation, health regulations, manual handling procedures and organisation insurance requirements.
Work requires individuals to demonstrate research, analytical, judgement and problem-solving skills in the diagnosis of faults.
Materials and equipment options are to include those in general service in the industry and those identified as emerging technology.
Workplace environment
The function is undertaken in accordance with established enterprise procedures and practices may include requirements recommended by manufacturer/component supplier.
Customers or suppliers may be internal or external.
Machines/equipment
Machines/equipment may include:
any machine typically used in the bodyworks industry
microprocessor or computer controlled machines.
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices.
Information and procedures
Sector trade journals and related publications.
Work procedures/instructions.
Manufacturer/component supplier specifications and instructions.
Standard forms of workplace process and procedure.
Organisation work specifications and requirements.
Australian Design Rules.
Legislation/regulations/national and industry codes and practices relevant to the product.
Australian Standards and quality procedures.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
WHS requirements include legislation, vehicle industry regulations, safety management systems, hazardous substances and dangerous goods code, and safe operating procedures.
Work is carried out in accordance with legislative obligations, Australian Design Rules, environmental legislation, health regulations, manual handling procedures and organisation insurance requirements.
Work requires individuals to demonstrate research, analytical, judgement and problem-solving skills in the diagnosis of faults.
Materials and equipment options are to include those in general service in the industry and those identified as emerging technology.
Workplace environment
The function is undertaken in accordance with established enterprise procedures and practices may include requirements recommended by manufacturer/component supplier.
Customers or suppliers may be internal or external.
Machines/equipment
Machines/equipment may include:
any machine typically used in the bodyworks industry
microprocessor or computer controlled machines.
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices.
Information and procedures
Sector trade journals and related publications.
Work procedures/instructions.
Manufacturer/component supplier specifications and instructions.
Standard forms of workplace process and procedure.
Organisation work specifications and requirements.
Australian Design Rules.
Legislation/regulations/national and industry codes and practices relevant to the product.
Australian Standards and quality procedures.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Locate, interpret and apply information.
Apply safety requirements throughout the work sequence, including the use of personal protective clothing and equipment.
Lead others and work effectively to improve production quality and outcomes.
Evaluate materials, equipment and bodywork processes considering:
materials and equipment currently available
materials and equipment innovations and potential
equipment capabilities and availabilities
workforce availabilities and capabilities
cost benefit analysis (or equivalent).
Identify the impact of decisions in terms of commercial, environmental and safety risks.
Encourage participation of staff in the planning of work activities and changes.
Context of, and specific resources for assessment
Assessment may occur on the job or in a workplace simulated facility with process equipment, materials, work instructions and deadlines.
Access to a full range of current and emerging bodywork technology information.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competence.
Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Locate, interpret and apply information.
Apply safety requirements throughout the work sequence, including the use of personal protective clothing and equipment.
Lead others and work effectively to improve production quality and outcomes.
Evaluate materials, equipment and bodywork processes considering:
materials and equipment currently available
materials and equipment innovations and potential
equipment capabilities and availabilities
workforce availabilities and capabilities
cost benefit analysis (or equivalent).
Identify the impact of decisions in terms of commercial, environmental and safety risks.
Encourage participation of staff in the planning of work activities and changes.
Context of, and specific resources for assessment
Assessment may occur on the job or in a workplace simulated facility with process equipment, materials, work instructions and deadlines.
Access to a full range of current and emerging bodywork technology information.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competence.
Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role.
Guidance information for assessment
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W5146 | AURT577394A | Evaluate and select bodywork materials, equipment and processes | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWZ63 | AURVTN034 | Evaluate vehicle body repair materials, equipment and work processes | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J423 | AUR50212 | Diploma of Automotive Technology | Qualification |