Unit of competency Outline

Date retreived
22/07/2026 6:34 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Investigate a pest control failure

Investigate a pest control failure

Unit of competency
National Code
AHCPMG509
State Code
BAP12
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
059901 - Pest And Weed Control
Original Release Date
12/01/2017
Nominal Hours
55
Description
This unit of competency describes the skills and knowledge required to investigate causes of pest control failure after the implementation of a pest management plan.Pests may be weeds, vertebrate or invertebrate pests or a combination of these.Treatment may be any measure used to decrease the pest population and the damage caused by it.This unit applies to regional pest control officers and managers who take personal responsibility for their own work and exercise autonomy in undertaking complex work. They analyse and synthesise information and analyse, design and communicate solutions to sometimes complex problems. Individuals operating in this field are required to hold current chemical handling certification and a first aid certificate. Other licensing conditions may also apply to this unit. Specific determination should be sought through the relevant State or Territory.
Notes
Elements and Performance Criteria
1. Assess planning techniques used
  • 1.1 Determine and assess management techniques used in the pest management plan
  • 1.2 Assess the level of community and stakeholder consultation carried out
  • 1.3 Evaluate the level of commitment gained from the community and stakeholders
  • 1.4 Assess whether the definition of the pest problem is correct
  • 1.5 Assess staff understanding of the pest and the damage caused
  • 1.6 Determine monitoring techniques used and assess suitability
2. Assess treatment failure
  • 2.1 Assess whether damage caused by the pest after treatment is within expectations
  • 2.2 Determine pre-treatment and post-treatment pest infestation levels by monitoring pest management plan records and inspection
  • 2.3 Determine expected pest population after treatment using available information
  • 2.4 Assess the difference between expected and monitored population
  • 2.5 Assess treatments and application techniques used
  • 2.6 Determine whether failure is due to product failure or pesticide resistance if pesticides are involved
  • 2.7 Determine operator’s qualifications and experience in applying a particular pest treatment where appropriate
3. Evaluate solutions to the failure
  • 3.1 Assess possible solutions to the failure
  • 3.2 Determine best option for solution based on cost, appropriateness to the problem and timing
  • 3.3 Review pest management plans and implementation plans as required and advise stakeholders, personnel and contractors of the changes
No information
No information
Replaces
State Code National Code Title Type
D7133 AHCPMG406A Investigate a reported pest treatment failure Unit of competency
Replaced By
State Code National Code Title Type
OCT34 AHCPMG502 Investigate a pest control failure Unit of competency