Unit of competency Outline

Date retreived
22/07/2026 1:31 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Trim equine hooves

Trim equine hooves

Unit of competency
National Code
ACMFAR313
State Code
OAL46
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
11/12/2018
View on TGA
State Implementation and Classification
Approved Date
29/05/2019
Field of Education
050105 - Animal Husbandry
Original Release Date
29/05/2019
Nominal Hours
70
Description
This unit of competency describes the skills and knowledge required to handle equines safely and trim hooves using appropriate techniques and tools.The unit applies to individuals who trim equine hooves for shoes and/or natural hooves. They take responsibility for their own work and apply knowledge and practical skills to trim equine hooves as part of the hoof care plan.Workplace health and safety and animal welfare legislation relevant to interacting with horses applies to workers in this industry. Requirements vary between industry sectors and state/territory jurisdictions. Users are advised to check with the relevant authority for specific requirements.No licensing or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to trim equine hooves
  • 1.1 Carry out a basic risk assessment of equine behaviour and environmental hazards and take steps to control risks
  • 1.2 Prepare and set up tools and equipment according to workplace requirements
  • 1.3 Identify, fit and use personal protective equipment according to health and safety in the workplace procedures
  • 1.4 Select a safe handling and control method suitable for the individual equine
  • 1.5 Observe and assess equine physique, stance and gait prior to trimming
2. Assess hoof condition
  • 2.1 Adopt a safe working position for self and equine balance and comfort
  • 2.2 Lift, hold and clean equine feet to assess hoof condition
  • 2.3 Remove shoes safely using appropriate tools and methods if equine is shod
  • 2.4 Assess gait, balance of hoof and the wear patterns of the shoes and/or hooves to inform future hoof care plan
  • 2.5 Examine the hoof thoroughly checking for damage, abnormalities, pathologies and foreign objects
  • 2.6 Consider workload levels, environment and diet that impact on equine welfare as part of the hoof care plan
3. Trim equine hooves safely
  • 3.1 Select appropriate trimming technique for individual equine
  • 3.2 Use appropriate tools and technique to trim fore and hind hooves
  • 3.3 Trim hooves within limits of safe trimming margins, according to hoof care plan and industry standards
  • 3.4 Apply hoof treatment medication or products, according to the hoof care plan or veterinarian instructions
  • 3.5 Recognise conditions that require referral to a registered veterinarian
4. Carry out post-hoof trimming activities
  • 4.1 Review finished work against hoof care plan
  • 4.2 Review gait and discuss any changes to initial assessment with equine owner or carer
  • 4.3 Ensure working area is tidy and free of hazards and tools are cleaned and stored safely according to workplace standards
  • 4.4 Finalise business transactions and discuss need for any future visits with client
No information
No information
No information
State Code National Code Title Type
BEE1 ACM30918 Certificate III in Equine Hoof Care Qualification
BHN5 ACM30921 Certificate III in Equine Hoof Care Qualification
BEE0 ACM40818 Certificate IV in Farriery Qualification