Unit of competency Outline

Date retreived
22/07/2026 10:47 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct folding-arm style awnings

Construct folding-arm style awnings

Unit of competency
National Code
MSFBA3004
State Code
WI265
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
56
Description
This unit of competency covers constructing folding-arm style awnings. It applies in a workplace environment and may be conducted in small to large scale enterprises.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Establish work requirements and prepare for work
  • 1.1 Work health and safety (WHS) requirements, legislative requirements and workplace practices are observed throughout the work
  • 1.2 Personal protective equipment is selected and used
  • 1.3 Work order requirements are checked and confirmed
  • 1.4 Tools and equipment are selected and checked for safe operation
  • 1.5 Material and hardware is selected and checked against work requirements with material checked for flaws
2 Cut materials ready for assembly
  • 2.1 Folding arms are selected following work order and workplace practices
  • 2.2 Roller, front rail and square head rail are cut
  • 2.3 Correct side of material and pattern direction is identified
  • 2.4 Material for skin is laid out laid out flat and square on a cutting table large enough to take full width of material, marked using chalk, markers or pencil and cut
  • 2.5 Material is joined to form awning skin
  • 2.6 Measurements are checked against work order
3 Construct awning
  • 3.1 Arm assembly is constructed following manufacturer instructions
  • 3.2 Roller and front rail are attached to skin
  • 3.3 Skin is fitted to arm assembly
4 Make quality checks
  • 4.1 Completed awnings are checked ensuring finished product matches work order
  • 4.2 Completed awning is tested within the limitations of normal operation to ensure correct and safe operation and parts of the work that do not comply with work order are repaired or re-worked
5 Complete work
  • 5.1 Finished work is cleaned, packaged with installation hardware and stored following workplace practices
  • 5.2 Tools and equipment are cleaned, maintained and stored
  • 5.3 Faulty tools and equipment are reported to appropriate personnel
  • 5.4 Work area is cleaned and waste is disposed of in accordance with workplace practices and environmental legislation covering disposal of industrial waste
  • 5.5 Workplace documentation is completed
No information
No information
No information
State Code National Code Title Type
J737 MSF30913 Certificate III in Blinds, Awnings, Security Screens and Grilles Qualification