Unit of competency Outline

Date retreived
22/07/2026 10:21 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test and service electric outdoor power equipment

Test and service electric outdoor power equipment

Unit of competency
National Code
AURPTR002
State Code
AXB71
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to test and service electric outdoor power equipment according to manufacturer specifications. It involves preparing for the task, testing and servicing the equipment, performing post-service testing, and completing workplace processes and documentation.It applies to those working in the outdoor power equipment service and repair industry. The electric outdoor power equipment may be 240 volt or cordless battery powered, and includes shears, blowers, shredders, mulchers, chainsaws, line trimmers, or lawn edgers. This unit does not apply to 240 volt portable generators.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Prepare for test
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Test and service procedures and information are sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Test equipment and tools are selected and checked for serviceability
2. Conduct test and interpret results
  • 2.1 Operational tests are carried out according to manufacturer specifications, workplace procedures, and safety requirements
  • 2.2 Test results are compared with manufacturer specifications
  • 2.3 Authorisation to proceed is obtained according to workplace procedures
3. Prepare to service equipment
  • 3.1 Service options are analysed and those most appropriate to the circumstances are selected
  • 3.2 Tools, equipment and materials are selected and checked for serviceability
4. Service equipment
  • 4.1 Components are serviced, adjusted and replaced according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  • 4.2 Post-service testing is carried out according to workplace procedures
5. Complete work processes
  • 5.1 Final inspection is made to ensure work is to workplace expectations and electrical equipment is presented ready for use, including protective guards, cowlings and safety features
  • 5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 5.2 Tools and equipment are checked and stored according to workplace procedures
  • 5.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF307 AURPTR2002 Test and service outdoor electric powered equipment Unit of competency
Replaced By
State Code National Code Title Type
OCJ96 AURPTR102 Test and service electric outdoor power equipment Unit of competency