Unit of competency Outline

Information current as of
20/10/2026 9:30 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Rectify minor faults in vehicle paintwork

Rectify minor faults in vehicle paintwork

Unit of competency
National Code
AUMATP001
State Code
WH921
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Original Release Date
10/01/2014
Nominal Hours
25
Field of Education
030507 - Automotive Vehicle Refinishing
Description
This unit describes the performance outcomes required to assess and rectify paintwork on vehicle bodies and components as a result of manufacturing and production line damage or defective painting procedures.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1. Plan and prepare
  • 1.1 Workplace procedures for the assessment and repair of vehicle paintwork are identified
  • 1.2 Work instructions, rectification reports and quality standards are obtained and confirmed
  • 1.3 Spray painting tools, equipment and materials are identified, prepared and checked for correct operation
2. Assess paintwork defects
  • 2.1 Vehicle body panels and components are inspected to confirm extent and nature of paint defect
  • 2.2 Damaged or defective paintwork is assessed and a repair plan developed and confirmed
3. Rectify paintwork defects
  • 3.1 Defective areas are prepared
  • 3.2 Surrounding areas are protected from repair activities
  • 3.3 Paint defects are rectified in line with vehicle specifications and workplace quality standards
  • 3.4 Paint drying method is selected and applied
  • 3.5 Repaired vehicle is prepared for final inspection and returned to production sequence
4. Complete work processes
  • 4.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures
  • 4.2 Tools and equipment are cleaned, checked and stored according to workplace procedures
  • 4.3 Faulty equipment is identified, tagged and reported to supervisor
  • 4.4 Workplace documentation is completed according to workplace procedures
No information
No information
No information