Unit of competency Outline
Date retreived
22/07/2026 3:09 PM AWST
22/07/2026 3:09 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Maintain tools and dies
Maintain tools and dies
Unit of competency
National Code
MEM18015B
MEM18015B
State Code
W5558
W5558
TGA Status
Replaced
Replaced
DTWD Status
Transition (Replaced)
Transition (Replaced)
State Implementation and Classification
Approved Date
11/09/2006
Field of Education
030705 - Toolmaking
Original Release Date
11/09/2006
Nominal Hours
36
Description
This unit covers identifying and analysing defects in tooling, disassembling and assessing tooling components, manufacturing or repairing tooling components to conform to specifications, and assembling tooling components. Potential production/maintenance problems are also identified. The tooling being maintained may include press tools, plastic moulds, forging dies, die casting or jigs and fixtures and gauges etc. requiring precision repair.
Notes
Elements and Performance Criteria
1. Identify and analyse defects in tooling
- 1.1. Defects are determined from any of: production components produced, production reports or tool inspections.
- 1.2. Sequence of maintenance operations is planned.
2. Disassemble and assess tooling components
- 2.1. Tooling is disassembled, and condition of components against prints, drawings, manufacturers' drawings etc. is assessed.
- 2.2. Worn/damaged parts are replaced/reconditioned.
3. Obtain and prepare replacement materials
- 3.1. Materials are obtained to meet tooling requirements.
4. Manufacture/repair tooling components
- 4.1. Appropriate hand and hand held power tools are selected and used.
- 4.2. Appropriate machining process is chosen from a range of standard tool room machines.
- 4.3. Machining parameters are set to produce components to specification.
- 4.4. Where appropriate, heat treatment is initiated according to specification.
5. Assemble tooling components
- 5.1. Using acceptable tool making techniques and procedures, tooling components are checked and assembled correctly in conformance with specifications.
6. Measure production components
- 6.1. Production components are checked with precision instruments to ensure conformance to specifications as required.
7. Identify potential production/maintenance problems
- 7.1. Conditions leading to tooling failure are identified and recorded.
- 7.2. Recurrent faults are identified and solutions are initiated.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to maintain tool and dies. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with tool and die maintenance or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning should not require language, literacy and numeracy skills beyond those required in this unit. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to maintain tool and dies. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with tool and die maintenance or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning should not require language, literacy and numeracy skills beyond those required in this unit. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAU79 | MEM18015 | Maintain tools and dies | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W245 | MEM40105 | Certificate IV in Engineering | Qualification |
| W247 | MEM50105 | Diploma of Engineering - Advanced Trade | Qualification |
| W237 | MEM30205 | Certificate III in Engineering - Mechanical Trade | Qualification |
| W726 | LMT31909 | Certificate III in Engineering - TCF Mechanic | Qualification |