Unit of competency Outline

Date retreived
22/07/2026 3:32 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Shut down and bank steam boiler

Shut down and bank steam boiler

Unit of competency
National Code
PPMSTM330
State Code
AXF61
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
24/10/2018
View on TGA
State Implementation and Classification
Approved Date
25/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
25/08/2016
Nominal Hours
90
Description
This unit of competency describes the skills and knowledge required to shut down steam boilers in planned, unplanned and emergency situations and to inspect, maintain and store boilers.The unit applies to production operators and technicians who shut down and bank steams boilers in a pulp or paper manufacturing facility. This typically involves working in a facility with complex integrated equipment and continuous operations.No licensing, legislative or certification requirements apply to this unit at the time of publication. Where the boiler equipment falls under the category for which a High Risk Work Licence is required, this unit should not be used and the appropriate unit should be sought.
Notes
Elements and Performance Criteria
1. Shut down, inspect and maintain boiler
  • 1.1 Initiate appropriate isolations and shut down boiler and ancillary plant following workplace health and safety and standard operating procedures (SOP)
  • 1.2 Prepare boiler for inspection
  • 1.3 Establish condition of boiler to ensure safe removal of equipment
  • 1.4 Inspect boiler and complete routine preventative maintenance
  • 1.5 Clean boiler internally and externally in line with environmental protection practices
  • 1.6 Record and report maintenance requirements
  • 1.7 Select, fit, use and maintain personal protective equipment according to job requirements and task to be undertaken
2. Store boiler in shutdown mode
  • 2.1 Establish storage time and condition of storage
  • 2.2 Store boiler in safe condition for access in line with manufacturer's specifications
  • 2.3 Analyse stored boiler water and chemicals when boiler is stored for extended periods
3. Respond to unplanned or emergency shutdowns
  • 3.1 Respond to shutdown requirement immediately
  • 3.2 Follow organisational safety procedures to maintain safety of personnel and plant during emergency shutdown situations
  • 3.3 Identify and locate cause of shutdown
  • 3.4 Monitor and maintain continuing plant operation in safe working mode
  • 3.5 Notify relevant personnel to rectify and make plant ready for restart
4. Record and report shutdown data
  • 4.1 Record shutdown and corrective action processes
  • 4.2 Report shutdown information to relevant personnel
No information
No information
Replaces
State Code National Code Title Type
WJ079 FPPSTM330A Shut down and bank steam boiler Unit of competency
Replaced By
State Code National Code Title Type
ODT53 PPMSTM301 Perform steam boiler operations Unit of competency