Unit of competency Outline

Date retreived
22/07/2026 9:11 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Position, set-up and operate variable message signs

Position, set-up and operate variable message signs

Unit of competency
National Code
RIIRTM201E
State Code
OCX03
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2021
View on TGA
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
030717 - Plant And Machine Operations
Original Release Date
18/06/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to transport, position, operate and remove variable message signs, which may be truck or trailer mounted, and conduct housekeeping activities relevant to the task in the civil construction industry.It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take some responsibility for the quality of work outcomes.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to position, set up and operate a variable message sign
  • 1.1 Obtain, interpret, clarify and confirm work instructions
  • 1.2 Access, interpret and apply documentation required to position, set-up and operate variable message signs
  • 1.3 Select and wear personal protective equipment required for work activity
  • 1.4 Identify, address and report potential risks, hazards and environmental issues and implement control measures within scope of own role
  • 1.5 Identify, confirm, clarify and apply environmental protection requirements
  • 1.6 Obtain and interpret emergency procedures and identify steps required to respond to emergencies
2. Transport variable message sign
  • 2.1 Conduct variable message sign pre-start check and report or rectify faults as required
  • 2.2 Prepare variable message sign for transportation
  • 2.3 Confirm variable message sign is secured to vehicle
  • 2.4 Connect, manoeuvre and transport variable message sign according to job requirements
  • 2.5 Enter work site according to road and traffic management requirements
  • 2.6 Park-up and confirm braking system is engaged
  • 2.7 Check variable message sign controls and functions and report or rectify faults as required
3. Position variable message sign
  • 3.1 Position variable message sign according to traffic management plan or diagram and traffic and site safety regulations and guidelines
  • 3.2 Complete site-specific risk assessment
  • 3.3 Select level site and confirm variable message sign is stable
  • 3.4 Confirm variable message sign visibility to road users
  • 3.5 Provide safe travel path for cyclists and pedestrians past variable message sign
  • 3.6 Initiate variable message sign security system
  • 3.7 Operate communication devices according to job requirements
4. Operate variable message sign
  • 4.1 Select, apply and change messages according to job requirements and manufacturer specifications
  • 4.2 Confirm variable message sign displays required message
  • 4.3 Confirm variable message sign is legible to road users
  • 4.4 Confirm message does not conflict with existing signage
5. Shut down and remove variable message sign from site
  • 5.1 Conduct shut-down procedures according to manufacturer specifications
  • 5.2 Prepare variable message sign for transportation
  • 5.3 Remove variable message sign from site according to road rules, site and traffic management requirements
6. Conduct clean-up activities
  • 6.1 Conduct inspection and fault finding according to manufacturer specifications and site requirements
  • 6.2 Carry out minor routine maintenance according to site requirements
  • 6.3 Clean, check, perform maintenance on and store tools and equipment according to manufacturer specifications and site requirements
No information
No information
Replaces
State Code National Code Title Type
AWB64 RIIRTM201D Position, set-up and operate a variable message sign Unit of competency
State Code National Code Title Type
BGL0 RII30920 Certificate III in Civil Construction Qualification