Unit of competency Outline
Date retreived
22/07/2026 5:04 PM AWST
22/07/2026 5:04 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Conduct the duties of an assistant on a heritage locomotive
Conduct the duties of an assistant on a heritage locomotive
Unit of competency
National Code
TLIC3072A
TLIC3072A
State Code
WG206
WG206
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
04/11/2014
Field of Education
039907 - Rail Operations
Original Release Date
04/11/2014
Nominal Hours
30
Description
This unit involves the skills and knowledge required to conduct the duties of an assistant on a heritage locomotive in accordance with workplace procedures and the requirements of relevant rail regulations and codes of practice.It includes carrying out or assisting with the following activities on a heritage locomotive in accordance with organisational requirements: checking, preparing and starting up prior to operation; coupling, uncoupling and shunting; assisting with operations and stabling. Licensing or certification requirements are not applicable to this unit.
Notes
Elements and Performance Criteria
1 Prepare to operate a heritage locomotive
- 1.1 Roster is checked and interpreted for day's operational activities
- 1.2 Allocation of locomotive is checked and confirmed
- 1.3 Train schedules/notices and other operational and regulatory documentation is accessed and interpreted in accordance with workplace procedures
- 1.4 Required personal protective equipment is obtained for use while operating the locomotive
- 1.5 Trackside safety and basic electrification awareness procedures are followed while locating the allocated heritage locomotive
2 Assist with preparing and starting a heritage locomotive
- 2.1 Logbook is checked to confirm serviceability of heritage locomotive
- 2.2 Locomotive is confirmed as being securely stabled prior to commencing preparation and safety checks
- 2.3 Preparation and safety checks are conducted in accordance with occupational health and safety (OH&S) and other workplace policies and procedures
- 2.4 Fluid levels and mechanical equipment are checked and appropriate action is taken if required
- 2.5 Locomotive is started in accordance with manufacturer and/or organisational instructions
- 2.6 For critical or serious equipment faults that cannot be readily rectified, locomotive is shut down, faulty equipment is isolated and tagged, and problem reported for rectification
- 2.7 All instruments and gauges are observed, readings are interpreted to confirm effective air and electrical operation, and where a problem is indicated, action is taken to determine the cause and to rectify or report the situation
- 2.8 Fluid levels are rechecked after starting and appropriate action is taken as required
- 2.9 Assistance is provided with pre-departure checks
- 2.10 Logbook and other service records on the locomotive are completed in accordance with organisational requirements
3 Assist with coupling, uncoupling and securing rail vehicles
- 3.1 Rail vehicles are positioned to meet coupling requirements in accordance with organisational policies and procedures
- 3.2 Coupling systems are identified and applied appropriately to couple and/or uncouple rail vehicles
- 3.4 Connecting hoses and electrical couplings are connected/disconnected in accordance with organisational policies and procedures
- 3.5 Hand brakes and other securing devices are applied/released attached/removed in accordance with organisational policies and procedures
4 Assist with operating a heritage locomotive
- 4.1 Safeworking activities are undertaken in accordance with organisational and/or network owner policies and procedures
- 4.2 Supervisory controls and indicators are monitored and operated in accordance with organisational policies and procedures
- 4.3 Assistance is provided with communications for network control officers and ground staff
- 4.4 Observation of all aspects of the rail corridor and environs is maintained and communicated to driver in accordance with organisational and/or network owner policies and procedures
- 4.5 When driver is incapacitated train is stopped, network control is informed and instructions are followed in accordance with organisational policies and procedures
- 4.6 Assistance with locomotive operation is provided as requested by driver
5 Assist with stabling a heritage locomotive
- 5.1 Locomotive is secured in accordance with directions, organisational procedures and rail regulations
- 5.2 Locomotive is shut down in accordance with manufacturer and/or operator instructions
- 5.3 Logbook and other service records on the locomotive are completed in accordance with organisational requirements
- 5.4 Cab is secured in accordance with organisational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Motive power equipment may include:
auxiliary systems
automatic control systems
braking systems
drive systems
instrumentation
communication systems
warning equipment
power source
vigilance systems
traction systems
head and marker lights
Inspection of a heritage locomotive may include:
lights
hoses
couplings
doors and door locks
springs
brake equipment
wheels
seals
sand and fuel
electrical cables
glass windows and doors
compressor oil levels
audible faults (e.g. hiss of escaping air)
visible faults (e.g. oil leaks, tears and cracks)
In-cab pre-operational checks will include:
brake checks
vigilance control test
functionality checks of supervisory controls and indicators
radio communication check
seat
windows and blinds
air conditioners and heaters
door locks
fire extinguishers
emergency toolbox
Relevant personnel may include:
train crew
train controllers and signallers
maintenance personnel
Safety and personal protective equipment may include:
gloves
sunscreen and sunglasses
safety glasses
insect repellent
safety headwear and footwear
two-way radios
hand lamps
flags
safety devices
audible indicators
breathing equipment
fire extinguishers
high visibility clothing
hearing protection
Information and documents may include:
notices in driver notice board/box
train driver roster sheet and/or table card
operational instructions, policies and procedures
emergency procedures manual
Applicable legislation, regulations and codes may include:
legislated rail safety requirements including acts and regulations from each applicable state and territory together with any nationally approved compliance codes and/or guidelines
relevant Australian Standards and related requirements
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
Motive power equipment may include:
auxiliary systems
automatic control systems
braking systems
drive systems
instrumentation
communication systems
warning equipment
power source
vigilance systems
traction systems
head and marker lights
Inspection of a heritage locomotive may include:
lights
hoses
couplings
doors and door locks
springs
brake equipment
wheels
seals
sand and fuel
electrical cables
glass windows and doors
compressor oil levels
audible faults (e.g. hiss of escaping air)
visible faults (e.g. oil leaks, tears and cracks)
In-cab pre-operational checks will include:
brake checks
vigilance control test
functionality checks of supervisory controls and indicators
radio communication check
seat
windows and blinds
air conditioners and heaters
door locks
fire extinguishers
emergency toolbox
Relevant personnel may include:
train crew
train controllers and signallers
maintenance personnel
Safety and personal protective equipment may include:
gloves
sunscreen and sunglasses
safety glasses
insect repellent
safety headwear and footwear
two-way radios
hand lamps
flags
safety devices
audible indicators
breathing equipment
fire extinguishers
high visibility clothing
hearing protection
Information and documents may include:
notices in driver notice board/box
train driver roster sheet and/or table card
operational instructions, policies and procedures
emergency procedures manual
Applicable legislation, regulations and codes may include:
legislated rail safety requirements including acts and regulations from each applicable state and territory together with any nationally approved compliance codes and/or guidelines
relevant Australian Standards and related requirements
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the required knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Assessment must include exercises which demonstrate competent performance of the following in a range of situations:
assisting with pre-operational activities
coupling and uncoupling a heritage locomotive
stabling a heritage locomotive
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriate range of situations in the workplace
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the required knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Assessment must include exercises which demonstrate competent performance of the following in a range of situations:
assisting with pre-operational activities
coupling and uncoupling a heritage locomotive
stabling a heritage locomotive
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriate range of situations in the workplace
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVJ86 | TLIC3072 | Conduct the duties of an assistant on a heritage locomotive | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J539 | TLI33013 | Certificate III in Heritage Locomotive Assistant or Steam Locomotive Fireman | Qualification |