Unit of competency Outline

Date retreived
22/07/2026 12:54 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct local geotechnical risk control in surface operations

Conduct local geotechnical risk control in surface operations

Unit of competency
National Code
RIIMEX303
State Code
OBW61
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
23/09/2020
View on TGA
State Implementation and Classification
Approved Date
05/03/2021
Field of Education
030911 - Geotechnical Engineering
Original Release Date
05/03/2021
Nominal Hours
70
Description
This unit describes the skills and knowledge required to conduct local geotechnical risk control in surface operations, including identifying ground conditions and implementing geotechnical risk controls.It applies to those working in operational roles. They generally work under minimal supervision to undertake a broad range of skilled applications in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for assessment of ground conditions
  • 1.1 Obtain, interpret and confirm work requirements
  • 1.2 Access, interpret and apply documentation and procedures required for conducting local geotechnical risk control in surface operations
  • 1.3 Select and wear personal protective equipment according to site requirements
  • 1.4 Confirm the work areas to be inspected and assessed
  • 1.5 Obtain and interpret existing information on ground conditions and hazards according to site requirements
  • 1.6 Identify key pit design features and associated hazards
  • 1.7 Discuss and address potential hazards and environmental factors with relevant personnel and identify potential control measures
  • 1.8 Identify and understand the ground control management plan within scope of own role
  • 1.9 Obtain and interpret emergency procedures and identify steps required to respond to emergencies according to site requirements
2. Inspect, assess and implement ground condition controls
  • 2.1 Inspect and assess ground conditions and implement controls
  • 2.2 Conduct an assessment of the work areas to confirm stability and record findings
  • 2.3 Implement appropriate controls to make safe or to maintain stable ground conditions in accordance with job role and workplace procedures
  • 2.4 Install barricades and warning signs where area cannot be made safe according to job and site requirements and report to relevant personnel
  • 2.5 Monitor and assess ground conditions during work activities according to site requirements
3. Record and report ground conditions, and conduct housekeeping activities
  • 3.1 Record and report ground conditions and corrective actions to relevant personnel according to workplace procedures
  • 3.2 Report potential hazards to relevant personnel according to workplace procedures
  • 3.3 Clean, maintain and inspect equipment according to manufacturer specifications and site requirements, and address and report any issues to relevant personnel
No information
No information
No information