Unit of competency Outline

Date retreived
22/07/2026 3:34 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use on-press print control devices

Use on-press print control devices

Unit of competency
National Code
ICPPRN492
State Code
AUM86
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
50
Description
This unit describes the skills and knowledge required to use computerised on-press print control devices.It applies to press operators who access or input print quality data and perform adjustments to match the proof and maintain print quality throughout the run.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Set up print control devices
  • 1.1 CIP3/CIP4 data is accessed for the next print run
  • 1.2 Data is pre-set and options/parameters selected according to the next job specifications
  • 1.3 Data is released to press according to manufacturer’s recommended procedure
  • 1.4 Accurate position and fit are attained
  • 1.5 Approximate colour, density and ink/water balance, if applicable, are attained
  • 1.6 Make ready sheets are scanned or corrections are inputted until print matches the proof or client’s requirements
  • 1.7 Client or supervisor’s approval is obtained prior to running the job
2. Maintain print quality throughout run
  • 2.1 Print quality is continuously monitored visually
  • 2.2 Sheets are scanned to verify visual assessment
  • 2.3 Any correctional data is released to maintain print quality
3. Maintain equipment
  • 3.1 Maintenance tasks are performed according to the operator’s manual
  • 3.2 Equipment is calibrated according to the operator’s manual
No information
No information
Replaces
State Code National Code Title Type
D3204 ICPPR492C Use on-press print control devices Unit of competency