Unit of competency Outline

Date retreived
22/07/2026 9:47 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install glass blockwork

Install glass blockwork

Unit of competency
National Code
CPCCBL3007
State Code
OCP40
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
01/06/2021
Nominal Hours
8
Description
This unit specifies the skills and knowledge required to install glass blocks into non-structural panels. This unit applies to people who install fire rated or standard glass blocks using various fixing methods to new or existing structures. It is suitable for people operating with some autonomy. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work.
  • 1.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
  • 1.2 Read, interpret and apply glass block installation requirements from current plans, specifications, standards and codes.
  • 1.3 Follow requirements in workplace safety and environmental documentation and workplace procedures.
  • 1.4 Use measurements and apply formulas to calculate material quantities.
  • 1.5 Determine job priorities and sequence job tasks in consultation with others on site.
  • 1.6 Identify potential hazards and determine and implement control measures.
  • 1.7 Select and check condition of plant, equipment and tools and report damage or faults to relevant person.
  • 1.8 Check conformity of glass bricks, adhesives and accessories and place materials in preparation for the work.
2 Set out for installation.
  • 2.1 Check opening size, lintel and flashing to suit glass block installation.
  • 2.2 Check base and head for level and abutting surfaces for plumb.
  • 2.3 Mix mortar to the correct consistency or use approved silicone product following manufacturer’s instructions.
3 Install glass blocks.
  • 3.1 Install expansion strips and reinforcements.
  • 3.2 Lay glass blocks level and plumb to the specified design.
  • 3.3 Remove excess mortar or silicone at completion and clean glass blocks.
  • 3.4 Use appropriate tool to achieve specified joint finish.
4 Clean up.
  • 4.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 4.2 Clean tools and equipment, check for serviceability and report damage or faults.
  • 4.3 Store and secure tools and equipment following workplace procedures.
No information
No information
Replaces
State Code National Code Title Type
W9326 CPCCBL3007A Install glass blockwork Unit of competency
State Code National Code Title Type
BGD8 CPC33020 Certificate III in Bricklaying and Blocklaying Qualification