Unit of competency Outline

Date retreived
23/07/2026 11:57 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair and overhaul aircraft pneumatic system components

Repair and overhaul aircraft pneumatic system components

Unit of competency
National Code
MEAMEC0061
State Code
OEH86
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
22/11/2022
View on TGA
State Implementation and Classification
Approved Date
28/03/2023
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
28/03/2023
Nominal Hours
110
Description
This unit describes the skills and knowledge required to apply hand skills, theory knowledge and maintenance publication procedures to repair and overhaul pneumatic system components from fixed and rotary wing aircraft in workshops during scheduled or unscheduled maintenance. Work may be performed individually or as part of a team.The unit is used in workplaces that operate under the airworthiness regulatory systems of the Civil Aviation Safety Authority (CASA) and the Defence Aviation Safety Authority (DASA).Any other relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Determine requirements
  • 1.1 Interpret and match component defect reports (removal tags) or customer order by part and serial numbers
  • 1.2 Inspect and/or operate pneumatic components through prescribed test procedures to establish serviceability or confirm defects, when required
  • 1.3 Clearly establish modification status to assist in determining the overhaul requirements for the components
  • 1.4 Identify and document the extent of overhaul or repair in accordance with standard enterprise procedures
2. Troubleshoot pneumatic components
  • 2.1 Use available information from maintenance records and test results, when required
  • 2.2 Use logical processes to ensure efficient and accurate troubleshooting
  • 2.3 Obtain specialist advice, when required, to assist with or confirm the fault and rectification requirement
  • 2.4 Locate pneumatic component faults and clearly identify the causes of the faults
  • 2.5 Determine fault rectification requirements to assist in planning the repair
3. Dismantle and inspect pneumatic parts
  • 3.1 Dismantle pneumatic component parts in accordance with maintenance manuals while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDSs) and items of personal protective equipment (PPE)
  • 3.2 Assess component parts for serviceability in accordance with the relevant maintenance documentation
  • 3.3 Tag parts requiring specialist repair and specify repair instructions in accordance with standard enterprise procedures
  • 3.4 Prepare parts requiring non-destructive testing (NDT) for testing in accordance with the relevant maintenance documentation
  • 3.5 Compile and process parts lists in accordance with standard enterprise procedures
4. Repair and/or modify pneumatic components or parts
  • 4.1 Repair and replace component parts in accordance with the relevant maintenance documentation
  • 4.2 Modify components or parts, when required, according to manufacturer’s bulletins or procedures
5. Assemble, test and adjust pneumatic components
  • 5.1 Assemble pneumatic component parts within specified tolerances and in accordance with the appropriate maintenance documents while observing all relevant WHS requirements, including the use of MSDSs and items of PPE
  • 5.2 Adjust, test or calibrate components to operate within prescribed specifications, and seek required supervisory guidance for complex testing and adjustments
  • 5.3 Tag, seal and pack finished components in accordance with standard enterprise procedures
  • 5.4 Complete required maintenance documentation and modification records and process in accordance with standard enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
AUE52 MEA381 Repair and/or overhaul aircraft pneumatic system components Unit of competency