Unit of competency Outline

Date retreived
22/07/2026 6:22 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and commission computer numerically controlled (CNC) software

Install and commission computer numerically controlled (CNC) software

Unit of competency
National Code
MSFFT4005
State Code
WI454
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
20/06/2014
Nominal Hours
20
Description
This unit of competency covers installing and commissioning CNC process and machine control programs in the furnishing industry.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for software installation
  • 1.1 Program format and operational intent is accurately determined and required applications identified
  • 1.2 Specifications are checked for required operating conditions
  • 1.3 Program instructions are checked for compliance with specifications
  • 1.4 Software timers are set to specification where required
2 Install automatic process machine control program
  • 2.1 Appropriate program loading technique is selected
  • 2.2 External loading devices are correctly connected to automatic process machine control systems
  • 2.3 Machine control system is placed in correct operational mode to accept program loading
  • 2.4 Program is downloaded in accordance with manufacturer recommended procedures and enterprise requirements
  • 2.5 Checks are made during and after downloading to ensure accurate and complete data transfer
  • 2.6 External program loading devices and connections are disconnected from process and machine control system
3 Commission automatic process and machine control program
  • 3.1 Operation of the equipment using the program is observed
  • 3.2 Outputs are checked and measured for compliance with specifications
  • 3.3 External inputs are checked for compliance with specifications according to specified procedures
  • 3.4 Total operation is checked for compliance with specifications where applicable
  • 3.5 Location of program master copy storage is confirmed
No information
No information
No information