Unit of competency Outline

Date retreived
22/07/2026 10:01 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Cut, sort and set cuttings

Cut, sort and set cuttings

Unit of competency
National Code
FWPNSY2002
State Code
ODS38
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
28/01/2022
View on TGA
State Implementation and Classification
Approved Date
21/06/2022
Field of Education
050301 - Horticulture
Original Release Date
21/06/2022
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to cut, sort and set cuttings as part of forestry operations. The unit applies to individuals who cut, sort and set cuttings as part of forestry operations.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for cutting
  • 1.1 Determine job requirements from work order or instruction, and where required seek clarification from appropriate personnel
  • 1.2 Confirm safety and environmental requirements, including use of personal protective equipment, for the task according to workplace procedures
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with cutting, sorting and setting operations
  • 1.4 Identify emergency and evacuation procedures to follow in the event of an incident or accident
  • 1.5 Consult with appropriate personnel to ensure that work is coordinated effectively with others in the workplace
  • 1.6 Select tools, equipment and materials for cutting, sorting and setting operations, and check for serviceability according to workplace procedures
  • 1.7 Clear and clean work area to prevent contamination of plants
2. Select cuttings for setting
  • 2.1 Use equipment according to manufacturer instructions and workplace procedures
  • 2.2 Prepare parent plant and take cutting using method appropriate to species
  • 2.3 Assess cuttings visually, select and condition for propagation to maintain maximum viability appropriate to species requirements
  • 2.4 Dispose of discarded cutting material according to workplace and environment protection practices
3. Prepare growing site and set cuttings
  • 3.1 Prepare growing environment and weed retardants according to work order, and workplace procedures and environment requirements
  • 3.2 Set cuttings in growing environment using appropriate tools and equipment
  • 3.3 Control pests and diseases as required according to workplace procedures
  • 3.4 Record and report cutting, sorting and setting production outcomes to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
AXK81 FWPFGM2209 Cut, sort and set cuttings Unit of competency
State Code National Code Title Type
BHL8 FWP20121 Certificate II in Forest Operations Qualification
BHK9 FWP20122 Certificate II in Forest Operations Qualification