Unit of competency Outline
Date retreived
22/07/2026 12:52 AM AWST
22/07/2026 12:52 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Apply levels of finish standards to planning and inspection of own work
Apply levels of finish standards to planning and inspection of own work
Unit of competency
National Code
CPCCPB3007
CPCCPB3007
State Code
OCQ29
OCQ29
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040313 - Ceiling, Wall And Floor Fixing
Original Release Date
01/06/2021
Nominal Hours
20
Description
This unit of competency specifies the skills and knowledge required to identify the level of finish standards and their application to the planning and inspection of own work.A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for task.
- 1.1 Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, and workplace requirements.
- 1.2 Select and use personal protective equipment (PPE) for each stage of the task.
2 Plan to achieve required levels of finish.
- 2.1 Assess workplace documents and specifications to establish and describe required levels of finish and related process requirements.
- 2.2 Plan use of materials and work processes to meet required level of finish.
3 Inspect completed work for level of finish.
- 3.1 Assess distinguishing features of levels of finish in the completed work against finish requirements.
- 3.2 Describe effects of framing tolerances, windows, light fittings and location of joints on finish of plasterboard.
- 3.3 Inspect build-up on joints for effect on level of finish.
- 3.4 Describe and assess classification level of finish of inspected work, identify problems to level of finish and select method of rectification.
- 3.5 Determine and describe requirements for painting of finished surface
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W9447 | CPCCPB3007A | Apply levels of finish standards to planning and inspection of own work | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGD5 | CPC31220 | Certificate III in Wall and Ceiling Lining | Qualification |