Unit of competency Outline

Date retreived
22/07/2026 6:00 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Profile saw blanks

Profile saw blanks

Unit of competency
National Code
FWPSAW3248
State Code
OBM13
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
29/05/2020
Field of Education
030715 - Precision Metalworking
Original Release Date
29/05/2020
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to calculate blade lengths and to produce tooth profiles to work orders and specifications. The unit applies to individuals who profile saw blanks in a forest and forest product factory setting.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for profiling
  • 1.1 Review work order to determine job requirements and, where required, seek clarification from appropriate personnel
  • 1.2 Review workplace health and safety requirements, including the use of personal protective equipment, equipment lock-out and safe manual handling techniques
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with profiling saw blanks
  • 1.4 Identify workplace environmental protection procedures for minimising and disposing of waste material, cleaning tools and equipment, and maximising energy efficiency
  • 1.5 Select appropriate tools and equipment, and check for operational effectiveness according to manufacturer recommendations
  • 1.6 Plan profiling process in line with work order and workplace requirements
2. Profile blanks
  • 2.1 Calculate key saw blade dimensions
  • 2.2 Obtain calculated blank length or cut from ribbon stock
  • 2.3 Set up press with punches to suit saw dimensions
  • 2.4 Punch first tooth in blank to align other teeth
  • 2.5 Punch remaining teeth to required pitch and tooth profile
  • 2.6 Assess performance of profiling equipment
  • 2.7 Dispose of irreparable saw blanks according to environmental protection practices
  • 2.8 Identify routine processing and equipment faults, and resolve or report to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
AXJ88 FWPSAW3221 Profile saw blanks Unit of competency
State Code National Code Title Type
BAM5 FWP30316 Certificate III in Sawmilling and Processing Qualification