Unit of competency Outline

Information current as of
21/10/2026 10:05 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Rectify faults in vehicle metal components

Rectify faults in vehicle metal components

Unit of competency
National Code
AUMATA003
State Code
WH902
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Original Release Date
10/01/2014
Nominal Hours
40
Field of Education
030507 - Automotive Vehicle Refinishing
Description
This unit describes the performance outcomes required to assess and repair faults to vehicle metal components as a result of manufacturing and production line damage or defective metal.It applies to individuals in an automotive and related component manufacturing environment and involves the application of skills and knowledge at a specialist level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1. Plan and prepare
  • 1.1 Work order, job instructions and quality requirements are located and confirmed with appropriate personnel
  • 1.2 Tools and equipment required for the job are identified, selected and checked for faults and correct operation
  • 1.3 Materials required to complete the job are identified and prepared
  • 1.4 Repair plan is prepared and confirmed with appropriate personnel
2. Assess fault
  • 2.1 Vehicle components are inspected for fault against job specifications and workplace quality standards
  • 2.2 Fault or defects are assessed and cause identified
3. Repair fault
  • 3.1 Repair activities are carried out according to workplace procedures
  • 3.2 Appropriate tools are used to repair fault or defects
  • 3.3 Faulty or defective areas are repaired to original equipment manufacturer (OEM) specifications and workplace quality standards
  • 3.4 Repaired components are inspected for compliance against OEM specifications and returned to the production sequence
4. Complete work processes
  • 4.1 Work area is cleaned, and materials disposed of, reused or recycled according to workplace procedures and cost-reduction initiatives
  • 4.2 Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures
  • 4.3 Faulty tools and equipment are identified, tagged and reported
  • 4.4 Repair work sheet is completed according to workplace procedures
No information
No information
No information