Unit of competency Outline

Date retreived
22/07/2026 10:21 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Dry softwood

Dry softwood

Unit of competency
National Code
FWPSAW3206
State Code
AXK02
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030305 - Materials Engineering
Original Release Date
05/10/2016
Nominal Hours
40
Description
This unit of competency describes the outcomes required to prepare timber racks for processing, load and unload conventional and high temperature kilns and to monitor and control kiln conditions to dry and recondition softwood. Work is completed in a forest products factory setting.The unit applies to those who dry softwood using a kiln in a forest products factory setting.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for drying
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Select appropriate personal protective and other equipment and use in line with manufacturer's recommendations.
  • 1.3 Identify and obtain type and quantity of softwood to be dried from conversion process.
  • 1.4 Plan drying process in line with work order.
2. Load and control kiln conditions
  • 2.1 Assess racks visually to ensure consistent drying requirements for timber and adjust as required.
  • 2.2 Measure moisture content and routinely compare with anticipated levels in line with organisational procedures.
  • 2.3 Complete pre start-up equipment checks to ensure operational effectiveness.
  • 2.4 Load kiln with racks selected for processing and report to appropriate personnel.
  • 2.5 Position baffles and blankets in line with manufacturer’s instructions.
  • 2.6 Adjust and check kiln control settings regularly in line with drying schedules and organisational safety procedures.
  • 2.7 Follow emergency shutdown procedures when alarm is triggered.
3. Unload kiln and process softwood
  • 3.1 Identify drying end point and make kiln safe for entry.
  • 3.2 Open kiln and identify moisture content of processed softwood.
  • 3.3 Remove moisture probes and baffles from timber.
  • 3.4 Direct and move softwood to storage or processing operations in line with organisational procedures.
  • 3.5 Identify sub-standard material and re-process or direct for lower value usage.
  • 3.6 Keep work area clean and clear of debris in line with organisational safety procedures.
  • 3.7 Identify routine processing and equipment faults and resolve or report to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6062 FPISAW3206B Dry softwood Unit of competency
Replaced By
State Code National Code Title Type
OFC89 FWPSAW3257 Operate timber drying kiln Unit of competency
State Code National Code Title Type
BAM5 FWP30316 Certificate III in Sawmilling and Processing Qualification