Unit of competency Outline

Date retreived
23/07/2026 5:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce complex converted or finished product

Produce complex converted or finished product

Unit of competency
National Code
ICPCBF3200
State Code
OBP50
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
40
Description
This unit describes the skills and knowledge required to cover complex die cutting, embossing, folding, collating or fastening.It applies to individuals who work under direct supervision with limited responsibility in preparing materials and equipment and resolving issues to produce a finished product.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Maintain delivery and cutting systems
  • 1.1 Monitor and adjust delivery systems
  • 1.2 Add substrate to and remove substrate from the process according to job specifications
  • 1.3 Check and adjust knife and die condition according to sample quality requirements
  • 1.4 Monitor and adjust cutting pressures and registration of cutting devices, knives and dies as required
  • 1.5 Monitor and adjust packing of cutting devices and dies as required
2. Maintain complex process
  • 2.1 Review and adjust registration and squareness of folds as required according to proof quality requirements
  • 2.2 Check and adjust collating and inserting process as required according to proof quality requirements
3. Maintain production process
  • 3.1 Use machine controls as required
  • 3.2 Review and verify performance using the process control system
  • 3.3 Monitor and adjust starch performance throughout production run
  • 3.4 Report process adjustments to eliminate problems according to enterprise procedures
4. Identify and rectify problems or faults
  • 4.1 Identify and report problems in machine operation according to enterprise procedures
  • 4.2 Carry out adjustments or corrections according to specified procedures, and within scope of own role
  • 4.3 Verify repairs and adjustments as required prior to resumption of operations
5. Conduct shutdown of production process
  • 5.1 Follow shutdown sequence according to manufacturer specifications and enterprise procedures
  • 5.2 Remove solid and liquid waste from operating area and recycle and dispose of, as required, according to regulatory requirements and enterprise procedures
  • 5.3 Clean and disengage all required parts of machinery used in printing process
  • 5.4 Sharpen cutting devices according to work health and safety (WHS) requirements
  • 5.5 Complete required production records and enterprise documentation
No information
No information
Replaces
State Code National Code Title Type
AUM60 ICPCBF320 Produce complex converted or finished product Unit of competency
State Code National Code Title Type
BFB9 ICP31320 Certificate III in Print Binding, Finishing and Packaging Qualification