Unit of competency Outline

Date retreived
22/07/2026 3:13 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Modify casts

Modify casts

Unit of competency
National Code
HLTCT402C
State Code
D5843
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
25/03/2011
View on TGA
State Implementation and Classification
Approved Date
02/08/2011
Field of Education
061799 - Rehabilitation Therapies, N.e.c.
Original Release Date
02/08/2011
Nominal Hours
60
Description
DescriptorThis unit of competency describes the skills and knowledge required to modify casts
Notes
Elements and Performance Criteria
1. Prepare to modify cast
  • 1.1 Assemble and check equipment and materials for modification of casts to ensure that it is in clean and in working order
  • 1.2 Receive and confirm if in doubt requirements for modification of cast with relevant personnel
  • 1.3 Assess client's condition and identify precautions and potential complications of modifying cast
  • 1.4 Explain procedure to client and obtain client consent/agreement
  • 1.5 Provide opportunities for the client to ask questions and discuss areas of concern
  • 1.6 Meet the comfort and safety needs of the client and applicator
  • 1.7 Review the condition of wound and pin site and refer to relevant personnel as required
2. Modify cast
  • 2.1 Position area to which cast is to be modified in accordance with industry best practice
  • 2.2 Meet the comfort and safety needs of the client and applicator
  • 2.3 Identify the client's specific needs in relation to modifying the cast
  • 2.4 Modify cast to meet client's needs according to instructions, if required
  • 2.5 Achieve correct handling to maintain/ correct/ modify soft tissue/ fracture position in accordance with pattern and/ or condition of injury
  • 2.6 Complete documentation
3. Undertake post modification procedures
  • 3.1 Clean client at completion of procedure
  • 3.2 Ensure the neurovascular status of limb is within normal limits
  • 3.3 Check the fit and functionality of cast
  • 3.4 Provide written and verbal advice to client and carer regarding the care of the cast and limb
  • 3.5 Fit client with sling, heel/overshoes and ambulation aids, as required
  • 3.6 Instruct client and ensure client is safe on correct use of ambulation aids
  • 3.7 Arrange appropriate support for client
4. Clean working environment
  • 4.1 Dispose of waste in accordance with waste management policies
  • 4.2 Clean equipment in accordance with manufacturer's specifications and stored safely
  • 4.3 Clean work surfaces in accordance with infection control guidelines
No information
No information
Replaces
State Code National Code Title Type
C9147 HLTCT402B Modify casts Unit of competency
Replaced By
State Code National Code Title Type
WD099 HLTCT402D Modify casts Unit of competency
No information