Unit of competency Outline

Date retreived
23/07/2026 12:23 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct explosive firings

Conduct explosive firings

Unit of competency
National Code
DEFEXO128
State Code
AVR61
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
26/10/2020
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
039999 - Engineering And Related Technologies, N.e.c.
Original Release Date
05/08/2016
Nominal Hours
0
Description
This unit describes the skills required to prepare and fire explosives in support of explosive research and proofing. Firing of explosives is a process used in the research or proofing environment to determine research outcomes. It involves the setting up of scientific measuring and recording instruments, in order to record the results of the firing for scientific analysis.This unit applies to personnel who are required to prepare and fire explosives in support of explosive research and proofing.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Those undertaking this unit would work individually or as part of a team, under indirect supervision, using discretion and judgement and taking responsibility for the quality of their outputs. They would conduct complex tasks in range of contexts.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for firing
  • 1.1 Identify and clarify requirements for firing of explosives and the tests to be conducted
  • 1.2 Confirm explosives to be fired and firing methods
  • 1.3 Liaise with and notify parties affected by the firing
  • 1.4 Prepare site and equipment
  • 1.5 Identify, calculate, and apply net explosive quantities and compatibility throughout the operation
  • 1.6 Set up test equipment
2 Fire explosive
  • 2.1 Prepare and test explosives and firing mechanisms
  • 2.2 Conduct firings
  • 2.3 Inspect residue to ensure all explosives have been fired
  • 2.4 Take and record measurements
3 Finalise the firing process
  • 3.1 Refurbish site and equipment
  • 3.2 Maintain documentation and records
No information
No information
No information