Unit of competency Outline
Date retreived
22/07/2026 10:04 AM AWST
22/07/2026 10:04 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Recover a motorsport vehicle
Recover a motorsport vehicle
Unit of competency
National Code
AURMDA3004
AURMDA3004
State Code
WF255
WF255
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
08/07/2013
Field of Education
030503 - Vehicle Mechanics
Original Release Date
08/07/2013
Nominal Hours
10
Description
This unit of competency describes the skills and knowledge required to recover damaged or broken-down vehicles in motorsport events in a safe and timely manner without causing further damage to the vehicle. Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Assess situation and plan recovery
- 1.1. Assess the equipment requirements and techniques to carry out the recovery
- 1.2. Confirm availability of recovery vehicle and associated equipment and personnel to carry out the job
- 1.3. Identify potential hazards at the recovery site and during the recovery operation and take appropriate precautions and strategies to manage and control the risks involved
- 1.4. Identify the type of vehicle to be towed and determine critical aspects of vehicle design that could impact recovery operations
- 1.5. Plan the recovery operation with consideration for security and safety of persons, vehicles and property
2. Set up and secure the recovery situation
- 2.1. Set up and secure the recovery situation in accordance with the established action plan
- 2.2. Deploy safety equipment, barriers and warning signs in accordance with operating procedures and regulatory requirements
- 2.3. Manage spectators and other personnel in the vicinity of the towing situation in accordance with safety procedures and security requirements
- 2.4. Manoeuvre vehicle to be recovered into position using appropriate equipment and standard operating procedures
- 2.5. Prepare the vehicle for recovery without causing damage to any component or system, as far as possible
3. Recover vehicle
- 3.1. Use personal protective equipment in accordance with standard operating procedures and workplace health and safety (WHS) requirements
- 3.2. Operate recovery equipment in accordance with manufacturer specifications, safe working practices and regulatory requirements
- 3.3. Identify attachment points and check the weight of the vehicle being recovered to ensure that they are consistent with established guidelines, regulatory requirements and the permissible safe working loads for the recovery vehicle and its associated equipment
- 3.4. Secure the recovered vehicle using appropriate winches, ropes and cables in accordance with relevant load restraint regulations and standard operating procedures
- 3.5. Safely convey and unload the recovered vehicle to the designated location
4. Clean up and complete reports
- 4.1. Clear the recovery area and its near vicinity of debris and clean up any spills
- 4.2. Complete recovery vehicle log in accordance with organisational requirements and regulations
- 4.3. Complete incident report and official forms related to recovery operations
5. Check and maintain equipment
- 5.1. Check recovery vehicle and equipment for operational effectiveness in accordance with manufacturer specifications and standard operating procedures
- 5.2. Carry out routine servicing and lubrication checks of the recovery vehicle and its equipment in accordance with the maintenance and service schedule
- 5.3. Identify and tag faulty equipment or components that may affect the safe operation of the vehicle and report to the appropriate personnel for rectification
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Motorsports
Motorsports may include:
automobile (car, truck and cart), motorcycle and powerboat events
competitions and practice sessions
circuit, track, speedway, rally, road and off-road events
club, state/territory, national and international events
Potential hazards
Potential hazards at the recovery location may include:
other vehicular traffic
live electrical wires
contaminated blood at scene
weather conditions
spilt or leaking oil or fuel (slippery surfaces)
unsafe or damaged equipment
unsafe procedures in the use of recovery equipment
fire
unsafe manual lifting procedures
sharp edges
Recovery vehicle
Recovery vehicle may include:
tow truck
tilt tray
trailer
dolly wheels
low loader
Safe work practices
Safe work practices may include:
use of flashing lights on vehicles
deployment of safety equipment (e.g. warning signs or witch's hats)
strategic positioning of recovery vehicle
use of appropriate personal protective equipment and clothing
checking equipment and isolating, rectifying or reporting any defective equipment
following correct procedures in the event of spilt or leaking fuel or oil
using correct portable firefighting equipment
use of reflective raincoats and vests
correct manual lifting strategies
Tools and equipment
Tools and equipment may include:
hand tools
chains, slings and ropes
safety equipment
towing bar
jack
shovel, broom and spill kit
remote lights, signs, torch and work light
air lines and fittings
reduction blocks
communication equipment
Communication skills
Communication skills to manage the reactions of participants to decisions may include:
addressing people politely
clarifying the relevant rule or regulation
presenting information in logical order
refraining from swearing, arguing or fighting
remaining patient
refraining from interrupting
speaking clearly
using language that is not patronising but at a suitable level
using body language and voice in an assertive but not aggressive manner
using non-discriminatory language
using effective listening and speaking skills
verifying what has been said or done and why it has been said or done
Information/documents
Sources of information/documents may include:
hardcopy and electronic media
verbal, written and graphical information
safe work procedures related to vehicle recovery and equipment operation
regulatory/legislative requirements pertaining to operating a recovery vehicle
National Competition Rules (NCR) and event supplementary regulations
motorsport organisation manuals, codes of conduct, policies and procedures
controlling body rules, category rules and supplementary regulations
event policies and procedures relating to work areas, authorities and lines of communication
task instructions, including briefings, worksheets, checklists and plans
WHS requirements
WHS requirements are to be in accordance with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
hazard and risk control
elimination of hazardous materials and substances
manual handling, including shifting, lifting and carrying
emergency procedures
Legislative requirements
Legislative requirements are to be in accordance with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice, and may include:
relevant state/territory roads and traffic authority driving regulations and licence/permit requirements pertaining to the recovery vehicle operations
award and enterprise agreements
industrial relations
confidentiality and privacy
WHS
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care
Environmental requirements
Environmental requirements may include but are not limited to:
waste management
noise
habitat, flora and fauna protection
clean-up management
Organisational policies and procedures
Organisational policies and procedures may include:
WHS, sustainability, environment, equal opportunity and anti-discrimination policies and procedures
industry codes of practice
safe work procedures
communication, reporting and recording procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Motorsports
Motorsports may include:
automobile (car, truck and cart), motorcycle and powerboat events
competitions and practice sessions
circuit, track, speedway, rally, road and off-road events
club, state/territory, national and international events
Potential hazards
Potential hazards at the recovery location may include:
other vehicular traffic
live electrical wires
contaminated blood at scene
weather conditions
spilt or leaking oil or fuel (slippery surfaces)
unsafe or damaged equipment
unsafe procedures in the use of recovery equipment
fire
unsafe manual lifting procedures
sharp edges
Recovery vehicle
Recovery vehicle may include:
tow truck
tilt tray
trailer
dolly wheels
low loader
Safe work practices
Safe work practices may include:
use of flashing lights on vehicles
deployment of safety equipment (e.g. warning signs or witch's hats)
strategic positioning of recovery vehicle
use of appropriate personal protective equipment and clothing
checking equipment and isolating, rectifying or reporting any defective equipment
following correct procedures in the event of spilt or leaking fuel or oil
using correct portable firefighting equipment
use of reflective raincoats and vests
correct manual lifting strategies
Tools and equipment
Tools and equipment may include:
hand tools
chains, slings and ropes
safety equipment
towing bar
jack
shovel, broom and spill kit
remote lights, signs, torch and work light
air lines and fittings
reduction blocks
communication equipment
Communication skills
Communication skills to manage the reactions of participants to decisions may include:
addressing people politely
clarifying the relevant rule or regulation
presenting information in logical order
refraining from swearing, arguing or fighting
remaining patient
refraining from interrupting
speaking clearly
using language that is not patronising but at a suitable level
using body language and voice in an assertive but not aggressive manner
using non-discriminatory language
using effective listening and speaking skills
verifying what has been said or done and why it has been said or done
Information/documents
Sources of information/documents may include:
hardcopy and electronic media
verbal, written and graphical information
safe work procedures related to vehicle recovery and equipment operation
regulatory/legislative requirements pertaining to operating a recovery vehicle
National Competition Rules (NCR) and event supplementary regulations
motorsport organisation manuals, codes of conduct, policies and procedures
controlling body rules, category rules and supplementary regulations
event policies and procedures relating to work areas, authorities and lines of communication
task instructions, including briefings, worksheets, checklists and plans
WHS requirements
WHS requirements are to be in accordance with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
hazard and risk control
elimination of hazardous materials and substances
manual handling, including shifting, lifting and carrying
emergency procedures
Legislative requirements
Legislative requirements are to be in accordance with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice, and may include:
relevant state/territory roads and traffic authority driving regulations and licence/permit requirements pertaining to the recovery vehicle operations
award and enterprise agreements
industrial relations
confidentiality and privacy
WHS
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care
Environmental requirements
Environmental requirements may include but are not limited to:
waste management
noise
habitat, flora and fauna protection
clean-up management
Organisational policies and procedures
Organisational policies and procedures may include:
WHS, sustainability, environment, equal opportunity and anti-discrimination policies and procedures
industry codes of practice
safe work procedures
communication, reporting and recording procedures
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently:
observe safety procedures and requirements
communicate effectively with others involved in or affected by the work
select methods and techniques appropriate to the circumstances
complete preparatory activities in a systematic manner
complete vehicle recovery procedures safely and without damage to vehicle or equipment
complete area clean-up
complete log book and reporting requirements.
Context of, and specific resources for assessment
The application of competency is to be assessed in the workplace or a simulated environment that reflects as far as possible the actual working environment.
Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints.
Assessment is to comply with relevant regulatory requirements, including specified Australian standards.
Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability.
The following resources should be made available:
access to relevant recovery vehicle and equipment
access to suitable motorsport events
applicable personal protection and safety equipment and resources
copies of safe work practices and standard operating procedures.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of Required Skills and Knowledge.
Assessment methods must be by direct observation of tasks and include questioning on Required Skills and Knowledge to ensure its correct interpretation and application.
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role.
Guidance information for assessment
Assessment processes and techniques must be culturally sensitive and appropriate to the language and literacy capacity of the candidate and the work being performed.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently:
observe safety procedures and requirements
communicate effectively with others involved in or affected by the work
select methods and techniques appropriate to the circumstances
complete preparatory activities in a systematic manner
complete vehicle recovery procedures safely and without damage to vehicle or equipment
complete area clean-up
complete log book and reporting requirements.
Context of, and specific resources for assessment
The application of competency is to be assessed in the workplace or a simulated environment that reflects as far as possible the actual working environment.
Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints.
Assessment is to comply with relevant regulatory requirements, including specified Australian standards.
Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability.
The following resources should be made available:
access to relevant recovery vehicle and equipment
access to suitable motorsport events
applicable personal protection and safety equipment and resources
copies of safe work practices and standard operating procedures.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of Required Skills and Knowledge.
Assessment methods must be by direct observation of tasks and include questioning on Required Skills and Knowledge to ensure its correct interpretation and application.
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role.
Guidance information for assessment
Assessment processes and techniques must be culturally sensitive and appropriate to the language and literacy capacity of the candidate and the work being performed.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D7630 | AURMO3007A | Recover a motorsport vehicle | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AXC23 | AURMDA004 | Recover vehicles at motor sport events | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J397 | AUR30912 | Certificate III in Motorsport Technology | Qualification |