Unit of competency Outline
Date retreived
23/07/2026 7:41 AM AWST
23/07/2026 7:41 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Construct wired floristry products
Construct wired floristry products
Unit of competency
National Code
SFLDEC305A
SFLDEC305A
State Code
D7680
D7680
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
26/10/2011
Field of Education
100309 - Floristry
Original Release Date
26/10/2011
Nominal Hours
40
Description
This unit describes the performance outcomes, skills and knowledge required to construct a range of wired floristry products to a pre-determined design. It requires the ability to access and interpret the job specifications, adapt as required, prepare for the construction, select the correct components and assemble and present a range of floral arrangements. The florist constructing the product may or may not have designed it, or developed the job specifications, but is expected to make adjustments during construction in response to technical restraints or to improve the floristry product.The following unit covers the primary design skills that relate to this unit: SFLDEC302A Design floristry productsNo licensing, legislative, regulatory or certification requirements apply to this unit at the time of endorsement.
Notes
Elements and Performance Criteria
1. Interpret the design and job specifications.
- 1.1. Access and interpret job specifications and discuss the design and its construction requirements with relevantpersonnel to meet all product requirements including cost requirements and production deadlines.
- 1.2. Read, view or discuss the job specifications to allow for correct selection of all components.
2. Select flower and plant materials and ancillary items.
- 2.1. Select flower and plant materials according to the job specifications and itemised job costing and sort them in preparation for construction.
- 2.2. Select ancillary and presentation items according to the job specifications and itemised job costing.
- 2.3. Identify any potential problems in meeting the design requirements and make any required adjustments.
3. Prepare to construct the floristry product.
- 3.1. Clean the product preparation area to avoid spoilage of flower and plant materials during preparation and construction.
- 3.2. Check that flower and plant materials have been correctly prepared and conditioned.
- 3.3. Recognise and report on any unsuitable materials and rectify according to the level of individual responsibility.
- 3.4. Identify and select equipmentand other construction components to be used during the construction.
- 3.5. Use energy, water and other resources efficiently during the preparation and subsequent construction process to reduce negative environmental impacts.
4. Construct wired floral designs.
- 4.1. Select appropriate wired floristry techniques according to the job specifications.
- 4.2. Produce key wired floristry products considering and applying the elements and principles of design.
- 4.3. Assess, determine and use the appropriate support methods in keeping with the job specifications.
- 4.4. Secure the floral arrangement according to the job specifications.
- 4.5. Modify the design of the wired floristry product according to need during the construction phase considering and applying the elements and principles of design.
5. Present and evaluate the wired floristry product.
- 5.1. Review and assess the finished floristry product for compliance with the job specifications and for its technical and aesthetic quality, making any necessary alterations before wrapping and packing.
- 5.2. Attach and secure ancillary and presentation items to the floral product.
- 5.3. Select wrapping and packaging materials and complete all required wrapping and any packaging according to the job specifications, adjusting, as required, to enhance the presentation.
- 5.4. Consider and apply the elements and principles of design when wrapping, packing and varying the presentation of the wired floristry product, checking against the job specifications.
- 5.5. Safely dispose of all waste, especially hazardous substances, to minimise negative environmental impacts.
- 5.6. Evaluate the entire presentation of the finished wired floristry product before displaying, despatching or providing to the customer.
- 5.7. Prepare any necessary documentation to justify variations to the original design and to inform future improvements.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Job specifications may include:
customer brief and how it has been met
location where floristry product will be used or displayed
purpose of the floristry product (e.g. for a special occasion)
photographs of the final design
photographs of various stages of construction
sketches
general overview of how to construct
complete instructions for construction including techniques to be used
itemised lists of all components and suppliers
notes on seasonal availability of flower and plant materials
itemised maximum cost of all components
relative costs of alternate components
itemised list of individual products to be produced as part of a suite and numbers required
size of each item to be constructed
estimated timeframe for the construction of all components.
Relevant personnel may include:
supervisor
manager
floral designer
studio designer
a more experienced florist
owner-operator of a small floristry business
production manager.
All components may include:
flowers and plant materials
construction materials
ancillary items and merchandise
presentation materials.
Flower and plant materials must include:
flowers including:
fresh (common, exotic and Australian wildflowers)
dry and preserved
artificial.
plant materials including:
fresh (common, exotic and Australian foliage)
dry and preserved
artificial.
Itemised job costing may include:
itemised lists of all components and associated individual costs of supply and sale
itemised maximum numbers of flowers and other items to be used in the construction of the floristry product
details of the composite product or products to be produced with cost of supply and sale.
Ancillary items may include:
chocolates, fruit, nuts, alcohol
hampers
gift items of any type
novelties such as balloons and toys
flower preservatives and conditioning agents.
Presentation items may include:
wrapping
gift cards and message items
corporate advertising of the business
corporate materials provided by the customer.
Problems may include:
lack of experience with flowers and plant materials
lack of experience with the variety and size of the various products e.g. those for a special occasion
constraints of a short production and delivery deadline
non-availability of the flower and plant materials
non-availability of ancillary, presentation and wrapping items
spoilt flower and plant materials
short life cycle and problems with maintaining quality during storage, production and display by the organisation or the customer
working with a design that does not work in the construction phase
constraints of OHS requirements
negative environmental impacts of materials chosen
inability to meet the customer preference or brief.
Spoilage of flower and plant materials may relate to:
cross-contamination of diseased or pest affected flowers and plant materials with healthy plants
incorrect application of humidity and temperature controls
incorrect exposure to environmental heating or air conditioning
incorrect application of conditioning or preservative agents or contamination with cleaning agents
incorrect storage causing crushing or wilting
incorrect handling and storage of fruit and vegetables.
Prepared and conditioned flower and plant materials may have been subject to:
trimming of foliage
trimming of stems
trimming away buds
provision of nutrients
use of preservative solutions
use of conditioning solutions
scalding
cooling
bathing
chemical spraying for pests and diseases
use of cleaning agents
dusting or wiping.
Unsuitable materials may include:
diseased or pest affected flowers and plant materials
damaged or crushed flowers and plant materials
wilted flowers and plant materials
flowers and plant materials with expired or near to expired use by dates that will not survive the display period.
Equipment and other construction components may include:
cutting tools including:
knives
scissors
rose de-thorner
secateurs
containers to mix cleaning and conditioning agents
baskets
decorative pots
buckets or decorative pails
containers (bowls, vases)
staple gun and staples
glue gun and glue
binding tape
heavy to fine gauge wire
floral foam (for fresh flowers and plant materials)
floral foam (for artificial flowers and plant materials)
frames
straw, moss
chicken wire
polystyrene
customised shapes
skewers.
Wired floristry techniques must include:
those using fine to heavy gauge wire
support wiring for flower and plant materials with a stem
wiring for flower and plant materials without a stem
stitching
pinning
pierce and twist
fork or hook
specialised wiring
cross wiring
peg wiring.
Key wired floristry products must include:
button hole
corsage
formal and informal posy
formal and informal trail
simple, formal and informal shower
shoulder spray
wrist spray
handbag spray
circlet
simple head piece or simple tiara
cake decoration
wired funeral shape
wreath.
Elements of design must include:
texture
form
colour
space
line.
Principles of design must include:
harmony
rhythm
balance
dominance
scale
proportion
contrast.
Wrapping and packaging materials may include:
boxes
cylinders
polypropylene
paper
cellophane
bows
ribbons
raffia.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Job specifications may include:
customer brief and how it has been met
location where floristry product will be used or displayed
purpose of the floristry product (e.g. for a special occasion)
photographs of the final design
photographs of various stages of construction
sketches
general overview of how to construct
complete instructions for construction including techniques to be used
itemised lists of all components and suppliers
notes on seasonal availability of flower and plant materials
itemised maximum cost of all components
relative costs of alternate components
itemised list of individual products to be produced as part of a suite and numbers required
size of each item to be constructed
estimated timeframe for the construction of all components.
Relevant personnel may include:
supervisor
manager
floral designer
studio designer
a more experienced florist
owner-operator of a small floristry business
production manager.
All components may include:
flowers and plant materials
construction materials
ancillary items and merchandise
presentation materials.
Flower and plant materials must include:
flowers including:
fresh (common, exotic and Australian wildflowers)
dry and preserved
artificial.
plant materials including:
fresh (common, exotic and Australian foliage)
dry and preserved
artificial.
Itemised job costing may include:
itemised lists of all components and associated individual costs of supply and sale
itemised maximum numbers of flowers and other items to be used in the construction of the floristry product
details of the composite product or products to be produced with cost of supply and sale.
Ancillary items may include:
chocolates, fruit, nuts, alcohol
hampers
gift items of any type
novelties such as balloons and toys
flower preservatives and conditioning agents.
Presentation items may include:
wrapping
gift cards and message items
corporate advertising of the business
corporate materials provided by the customer.
Problems may include:
lack of experience with flowers and plant materials
lack of experience with the variety and size of the various products e.g. those for a special occasion
constraints of a short production and delivery deadline
non-availability of the flower and plant materials
non-availability of ancillary, presentation and wrapping items
spoilt flower and plant materials
short life cycle and problems with maintaining quality during storage, production and display by the organisation or the customer
working with a design that does not work in the construction phase
constraints of OHS requirements
negative environmental impacts of materials chosen
inability to meet the customer preference or brief.
Spoilage of flower and plant materials may relate to:
cross-contamination of diseased or pest affected flowers and plant materials with healthy plants
incorrect application of humidity and temperature controls
incorrect exposure to environmental heating or air conditioning
incorrect application of conditioning or preservative agents or contamination with cleaning agents
incorrect storage causing crushing or wilting
incorrect handling and storage of fruit and vegetables.
Prepared and conditioned flower and plant materials may have been subject to:
trimming of foliage
trimming of stems
trimming away buds
provision of nutrients
use of preservative solutions
use of conditioning solutions
scalding
cooling
bathing
chemical spraying for pests and diseases
use of cleaning agents
dusting or wiping.
Unsuitable materials may include:
diseased or pest affected flowers and plant materials
damaged or crushed flowers and plant materials
wilted flowers and plant materials
flowers and plant materials with expired or near to expired use by dates that will not survive the display period.
Equipment and other construction components may include:
cutting tools including:
knives
scissors
rose de-thorner
secateurs
containers to mix cleaning and conditioning agents
baskets
decorative pots
buckets or decorative pails
containers (bowls, vases)
staple gun and staples
glue gun and glue
binding tape
heavy to fine gauge wire
floral foam (for fresh flowers and plant materials)
floral foam (for artificial flowers and plant materials)
frames
straw, moss
chicken wire
polystyrene
customised shapes
skewers.
Wired floristry techniques must include:
those using fine to heavy gauge wire
support wiring for flower and plant materials with a stem
wiring for flower and plant materials without a stem
stitching
pinning
pierce and twist
fork or hook
specialised wiring
cross wiring
peg wiring.
Key wired floristry products must include:
button hole
corsage
formal and informal posy
formal and informal trail
simple, formal and informal shower
shoulder spray
wrist spray
handbag spray
circlet
simple head piece or simple tiara
cake decoration
wired funeral shape
wreath.
Elements of design must include:
texture
form
colour
space
line.
Principles of design must include:
harmony
rhythm
balance
dominance
scale
proportion
contrast.
Wrapping and packaging materials may include:
boxes
cylinders
polypropylene
paper
cellophane
bows
ribbons
raffia.
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the following is essential:
ability to safely use floristry tools and hazardous substances
ability to correctly interpret the job specifications and to visually recognise and select the correct flower and plant materials
knowledge of the elements and principles of design, their interrelationships and their effects on the style and function of floristry products, and the ability to evaluate and modify the floral design throughout the construction phase in line with these elements and principles
ability to identify and resolve, throughout the construction phase, problems that may impact on the style, function and construction of the floristry product
ability to construct multiple and diverse wired floristry products which must include the key floristry products outlined in the range statement using the nominated wiring techniques. To ensure consistency of performance, ability to respond to different requirements and ability to use different techniques,this must occur over a period of time and cover the construction of products of varying sizes and complexities
completion of construction activities within commercial time constraints and deadlines determined by the customer or the organisation.
Context of and specific resources for assessment
Assessment must ensure:
access to comprehensive and sufficient job specifications for a diverse range of floristry products to allow the candidate to interpret, modify and construct a range of floristry products - noting that the candidate may have also developed the design
the construction of floristry products within a floristry design, preparation and product construction environment
a diverse, comprehensive and commercial range of tools used during the construction of floristry products e.g. knives, scissors, secateurs, staple guns
a diverse, comprehensive and commercial product range of flowers, plant materials, cleaning agents, preservatives, conditioning agents and construction, ancillary, presentation and wrapping items that can be used during the construction process.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct observation of the candidate preparing for and constructing a range of floristry products
project activities to construct floristry products for a local community organisation or a small scale event delivered by the training college
evaluation of a range of floristry products constructed by the candidate
review of a comprehensive portfolio prepared by the candidate that documents the entire construction process inclusive of notes on the interpretation of the job specifications, records of any problems encountered, justifications for varying the design and an evaluation of the final constructed product
case studies to assess the ability to react to different problems that arise during the construction phase
exercises to allow the candidate to correctly identify a diverse range of flower and plant materials through visual recognition
written and oral questioning or interview to test knowledge of such things as the elements and principles of design, minimal impact practices and the suitability of different techniques for different styles of product
review of portfolios of evidence and third-party workplace reports of on-the-job performance by the candidate.
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:
BSBDES301A Explore the use of colour
SFLDEC303A Maintain floristry tools and equipment
SFLDEC301A Design floristry products
SFLSOP202A Recognise flower and plant materials.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the following is essential:
ability to safely use floristry tools and hazardous substances
ability to correctly interpret the job specifications and to visually recognise and select the correct flower and plant materials
knowledge of the elements and principles of design, their interrelationships and their effects on the style and function of floristry products, and the ability to evaluate and modify the floral design throughout the construction phase in line with these elements and principles
ability to identify and resolve, throughout the construction phase, problems that may impact on the style, function and construction of the floristry product
ability to construct multiple and diverse wired floristry products which must include the key floristry products outlined in the range statement using the nominated wiring techniques. To ensure consistency of performance, ability to respond to different requirements and ability to use different techniques,this must occur over a period of time and cover the construction of products of varying sizes and complexities
completion of construction activities within commercial time constraints and deadlines determined by the customer or the organisation.
Context of and specific resources for assessment
Assessment must ensure:
access to comprehensive and sufficient job specifications for a diverse range of floristry products to allow the candidate to interpret, modify and construct a range of floristry products - noting that the candidate may have also developed the design
the construction of floristry products within a floristry design, preparation and product construction environment
a diverse, comprehensive and commercial range of tools used during the construction of floristry products e.g. knives, scissors, secateurs, staple guns
a diverse, comprehensive and commercial product range of flowers, plant materials, cleaning agents, preservatives, conditioning agents and construction, ancillary, presentation and wrapping items that can be used during the construction process.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct observation of the candidate preparing for and constructing a range of floristry products
project activities to construct floristry products for a local community organisation or a small scale event delivered by the training college
evaluation of a range of floristry products constructed by the candidate
review of a comprehensive portfolio prepared by the candidate that documents the entire construction process inclusive of notes on the interpretation of the job specifications, records of any problems encountered, justifications for varying the design and an evaluation of the final constructed product
case studies to assess the ability to react to different problems that arise during the construction phase
exercises to allow the candidate to correctly identify a diverse range of flower and plant materials through visual recognition
written and oral questioning or interview to test knowledge of such things as the elements and principles of design, minimal impact practices and the suitability of different techniques for different styles of product
review of portfolios of evidence and third-party workplace reports of on-the-job performance by the candidate.
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:
BSBDES301A Explore the use of colour
SFLDEC303A Maintain floristry tools and equipment
SFLDEC301A Design floristry products
SFLSOP202A Recognise flower and plant materials.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| S3961 | WRFD302B | Create floristry designs using wiring techniques | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVG59 | SFLDEC007 | Construct wired floristry products | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D545 | SFL30110 | Certificate III in Floristry | Qualification |