Unit of competency Outline

Date retreived
23/07/2026 12:56 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair timber structures

Repair timber structures

Unit of competency
National Code
TLIB2081
State Code
AVK79
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
29/01/2021
View on TGA
State Implementation and Classification
Approved Date
23/02/2016
Field of Education
040311 - Carpentry And Joinery
Original Release Date
23/02/2016
Nominal Hours
40
Description
This unit involves the skills and knowledge required to repair timber structures and their components, in accordance with safeworking and regulatory requirements, and workplace procedures.It includes determining job requirements; preparing and maintaining components, and performing repairs; cleaning up the site after maintenance activities; and completing documentation.People achieving competence in this unit will need to fulfil the applicable state/territory legislated rail safety requirements and to comply with relevant codes of practice and/or guidelines.Work is performed under minimal supervision, generally within a team environment. It involves the application of routine operational principles and procedures when repairing structures and their components, as part of workplace activities across a variety of operational contexts within the Australian rail system.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Structures are inspected as required to locate defects
  • 1.2 Hazards are identified, risks are assessed and control measures are implemented
  • 1.3 Job requirements are determined in accordance with workplace procedures, and scope of work and resources required are identified
2 Prepare component for repair
  • 2.1 Components requiring replacement are checked against standards and are measured for preparation of replacement component
  • 2.2 Materials required for job are identified and organised as required to enable appropriate replacement of components
  • 2.3 Replacement components are cut and shaped to the required standard in accordance with workplace procedures
  • 2.4 Surfaces of components are treated using appropriate methods and materials as required
3 Perform repairs
  • 3.1 Component is replaced to required standard in accordance with workplace procedures
  • 3.2 Connections between timber members are tightened, repaired or replaced using approved material and techniques
  • 3.3 External timber deficiencies in components are treated with suitable materials as required to minimise degradation of components
4 Clean up site
  • 4.1 Workplace procedures and environmental regulations and standards relevant to site clean-up are confirmed and clarified as required
  • 4.2 Waste is minimised and reused or disposed of in accordance with relevant workplace procedures, and environmental regulations and standards
  • 4.3 Cleaning products and materials are disposed of in accordance with relevant workplace procedures, and environmental regulations and standards
  • 4.4 Established site restoration practices are followed and problems with these practices are identified and reported
5 Complete documentation
  • 5.1 Required documentation procedures and processes are confirmed
  • 5.2 Documentation is filled in legibly and proofread
  • 5.3 Documentation is processed in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
D4956 TLIB2081A Repair timber structures Unit of competency