Unit of competency Outline

Date retreived
22/07/2026 1:27 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply gel coat or other polymer surface finish

Apply gel coat or other polymer surface finish

Unit of competency
National Code
PMBPROD251E
State Code
ODA75
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
18/02/2021
View on TGA
State Implementation and Classification
Approved Date
19/05/2021
Field of Education
030305 - Materials Engineering
Original Release Date
19/05/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to apply gel coat, flow coat or other similar surface finishes using manual application or spray equipment. This unit applies to an individual working alone or as part of a team.The unit principally refers to the skill level required in applying the polymer surface finish and that this skill level is associated with a good understanding of the characteristics of the gel coat or polymer material.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Check work requirements
  • 1.1 Identify requirements from job specifications
  • 1.2 Perform housekeeping tasks to prepare for work to be undertaken
  • 1.3 Perform pre-operational checks including checking for and acting on hazards
2. Conduct pre-production checks
  • 2.1 Check mould or surface for cracks, chips and cleanliness
  • 2.2 Undertake other pre-production set-up checks, including verification of raw materials
3. Apply coat
  • 3.1 Measure and mix materials based on job specifications
  • 3.2 Apply materials according to job specifications
  • 3.3 Ensure output meets job specifications and quality standards
  • 3.4 Accurately complete logs and records
  • 3.5 Apply waste management strategies to collect and segregate waste and other materials according to workplace procedures
  • 3.6 Clean equipment and work area according to operational and workplace procedures
  • 3.7 Pause or stop equipment in an emergency according to workplace and emergency procedures
4. Respond to process control variances
  • 4.1 Recognise and log process control variances and their causes
  • 4.2 Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
  • 4.3 Accurately maintain records and logbooks
No information
No information
Replaces
State Code National Code Title Type
BAJ13 PMBPROD251 Apply gel coat or other polymer surface finish Unit of competency