Unit of competency Outline

Date retreived
22/07/2026 5:19 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select, commission and maintain environmental monitoring instruments

Select, commission and maintain environmental monitoring instruments

Unit of competency
National Code
MSS027011
State Code
BAK57
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
08/08/2016
Field of Education
050999 - Environmental Studies, N.e.c.
Original Release Date
08/08/2016
Nominal Hours
100
Description
This unit of competency covers the ability to provide fully functioning environmental monitoring instruments to implement a workplace’s environmental management plan and monitoring programs. Personnel are required to identify the need for specific kinds of instruments, determine the suitability of available instruments, procure and commission instruments, check their serviceability and calibration, perform routine maintenance, train staff to operate instruments correctly and maintain relevant records.This unit of competency is applicable to environmental site coordinators, environmental managers and senior environmental officers working in all industry sectors. Note that the term ‘manager’ is used to refer to management of a function, project and /or program and does not necessarily imply line management.While no specific licensing or certification requirements apply to this unit at the time of publication, environmental monitoring and management activities are governed by relevant legislation, regulations and/or external accreditation requirements. Local requirements should be checked.
Notes
Elements and Performance Criteria
1 Procure suitable instruments
  • 1.1 Determine the types and specifications of instruments required by the workplace to implement the environmental monitoring program associated with site/project.
  • 1.2 Research information about the features of instruments that may be suitable and their suppliers.
  • 1.3 Liaise with suppliers and/or conduct tests to compare the stated performance of available instruments against workplace specifications.
  • 1.4 Seek advice/assistance with evaluating instruments if beyond own technical competence.
  • 1.5 Select the most suitable instruments and arrange for their procurement.
2 Commission new instruments
  • 2.1 Use manufacturer documentation to develop a thorough understanding of instrument operation, functional test procedures, routine instrument checks and maintenance requirements.
  • 2.2 Ensure that the instrument has been calibrated appropriately for intended use.
  • 2.3 Conduct component checks and test measurements to confirm instrument performance for intended use.
  • 2.4 Enter all required information about the new instrument in the workplace information management system.
  • 2.5 Develop and document clear procedures for operating, caring for and maintaining the instrument.
3 Train instrument operators
  • 3.1 Identify the knowledge and skills required to operate the instrument safely and reliably in the workplace and to interpret the environmental parameters measured.
  • 3.2 Develop an appropriate training program for instrument operators using established adult learning principles.
  • 3.3 Ensure that each operator can use the instrument competently for the required measurement applications.
  • 3.4 Record all training outcomes in accordance with regulator’s requirements and workplace procedures.
  • 3.5 Audit operator’s use of instruments at regular intervals to ensure their ongoing competence.
4 Maintain instruments fit for purpose
  • 4.1 Conduct regular instrument checks and minor maintenance in accordance with workplace procedures.
  • 4.2 Check instrument calibration using specified standards and/or procedures and record all relevant information.
  • 4.3 Troubleshoot basic faults and determine whether local repair/maintenance is technically possible and economic.
  • 4.4 Arrange for repair or servicing from an accredited agent or other appropriate personnel in accordance with workplace procedures.
  • 4.5 Check instrument performance after repair/service before approving it for use.
  • 4.6 Ensure all required instrument records are complete, accurate, legible and secure.
No information
No information
Replaces
State Code National Code Title Type
D7722 MSS027011A Select, commission and maintain environmental monitoring instruments Unit of competency
Replaced By
State Code National Code Title Type
OAS85 MSS027024 Select, commission and maintain environmental monitoring instruments Unit of competency